Install Instructions

FOR OUTDOOR INSTALLATIONS
MUST INSTALL THIS SIDE UP
OXB5024
POUR INSTALLATION EXTÉRIEURE
INSTALLER CE CÔTÉ VERS LE HAUT
INDUSTRY CANADA COMPLIANCE STATEMENT
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following
two conditions: (1) this device may not cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device.
IMPORTANT! Any changes or modifications not expressly approved by the party responsible for compliance could
void the user’s authority to operate this equipment.
This Class B digital apparatus complies with Canadian ICES-003.
TRADEMARK DISCLAIMER: Use herein of third party trademarks, service marks, trade names, brand names and/or product names are for
informational purposes only, are/may be the trademarks of their respective owners; such use is not meant to imply affiliation, sponsorship, or
endorsement.
TECHNICAL SUPPORT
For Technical Support, please contact Leviton Manufacturing at [e-mail], or 1-800-824-3005.
LIMITED 5 YEAR WARRANTY AND EXCLUSIONS
Leviton warrants to the original consumer purchaser and not for the benefit of anyone else that this product at the time of its sale by Leviton is free of defects in materials and workmanship under normal and proper use for five years from the purchase date. Leviton’s only obligation is to correct
such defects by repair or replacement, at its option. For details visit www.leviton.com or call 1-800-824-3005. This warranty excludes and there is disclaimed liability for labor for removal of this product or reinstallation. This warranty is void if this product is installed improperly or in an
improper environment, overloaded, misused, opened, abused, or altered in any manner, or is not used under normal operating conditions or not in accordance with any labels or instructions. There are no other or implied warranties of any kind, including merchantability and fitness for
a particular purpose, but if any implied warranty is required by the applicable jurisdiction, the duration of any such implied warranty, including merchantability and fitness for a particular purpose, is limited to five years. Leviton is not liable for incidental, indirect, special, or consequential
damages, including without limitation, damage to, or loss of use of, any equipment, lost sales or profits or delay or failure to perform this warranty obligation. The remedies provided herein are the exclusive remedies under this warranty, whether based on contract, tort or otherwise.
FOR CANADA ONLY
For warranty information and/or product returns, residents of Canada should contact Leviton in writing at Leviton Manufacturing of Canada ULC to the
attention of the Quality Assurance Department, 165 Hymus Blvd, Pointe-Claire (Quebec), Canada H9R 1E9 or by telephone at 1 800 405-5320.
FCC COMPLIANCE STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may
cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in
which case the user will be required to correct the interference at his own expense.
Any changes or modifications not expressly approved by Leviton could void the user’s authority to operate this equipment.
© 2019 Leviton Mfg. Co., Inc.
For Technical Assistance Call: 1-800-824-3005 (USA Only) or 1-800-405-5320 (Canada Only) www.leviton.com
DI-000-LDATA-00A
7. Strip and connect the white neutral wire to the load neutral terminal (silver) and the black power wire to the
brass load terminal on the previously chosen breaker. Orient antenna for best reception.
Clamp the ferrite clamp onto the power and neutral wires 5-8 inches from the data hub device. Place zip tie
around the ferrite clamp to secure it.
6. Strip and connect the white neutral wire to the load neutral terminal (silver) and the black power
wire to the brass load terminal on the previously chosen breaker. Orient antenna for best reception.
Clamp the ferrite clamp onto the power and neutral wires 5-8 inches from the data hub device. Place
zip tie around the ferrite clamp to secure it.
NOTE: When using LAN connectivity, do not pull the ethernet wire upward in order to keep the data
hub from turning and breaking the water tight seal or exposing the bottom openings.
A (Brass) Load Power
B (Silver) Load Neutral
Installing outside an enclosure.
WARNING: TO AVOID FIRE, SHOCK OR DEATH: TURN OFF POWER SUPPLYING THIS
EQUIPMENT, AND CONFIRM POWER IS OFF, before installing, removing or servicing this equipment.
3. Replace cover. 4. For optimal connectivity, when choosing your data hub's installation location, ensure it is on the
panel sides that are adjacent to the branch breaker section of your panel.
5. Remove knockout. Mount hub using gasket and locknut.
CAUTION: For exterior mounting, install the hub with the caution
label facing upward to ensure water resistance.
a.
b.
1. Remove the cover.
Configuration and Programming
For instructions on how to connect your Smart Breakers to the Smart Breaker Data Hub review the accompanying Smart Breaker Data Hub and Smart Breaker Set Up Guide.
Gasket
Knockout
level
Knockout
level
LAN Wire
LAN Wire
Locknut
Caution Label
A (Brass) Load Power
B (Silver) Load Neutral
LAN
Wi
2. Attach antenna for Wi-Fi or insert ethernet cable for LAN.
NOTE: Before securing
the antenna, ensure it is
properly aligned.
End View of Ferrite Clamp
NOTE: For outside installation, the data hub can only be
installed in the marked areas.
When main breaker is installed
above branch breakers.
When main breaker is installed
below branch breakers.
main
breaker
branch breakers
main
breaker
branch breakers
PATENT STATEMENT: Patents covering this product, if any, can be found at Leviton.com/patents.
NOTE: Ensure the ferrite
clamp does not pinch the
neutral and power wires.
WEB VERSION