Programmer/Remote Cat.
TABLE OF CONTENTS INTRODUCTION........................................................1 MENU NAVIGATION & ICONS..............................2–4 STARTUP...................................................................4 INSTALLATION CHECKLIST....................................5 Include Dimmers/Switches.....................................5 TEXT EDITOR........................................................6 Include Controller............................................6, 7 Update Controller..............
INTRODUCTION Leviton’s Programmer/Remote, Cat. No. RZCPG, is a multi-functional device. It uses Z-WaveTM technology to act as a programmer, zone or scene controller, remote for setting up and operating your ViziaTM RF network. This manual will guide you through the understanding of your RZCPG functions as a setup controller. Once your network is installed, your RZCPG may also be used as a wireless controller for controlling your lighting system. Your RZCPG comes with batteries.
MENU NAVIGATION and ICONS Navigating screens and menus on your RZCPG is accomplished using the following buttons: LCD Display x1 (HOME screen depicted) -RZCPGDefault Profile 1. Area #1 2. Area #2 3. Area #3 4. Area #4 Left Soft Key Stand By Right Soft Key Menu Arrow Buttons Center Button (up, down, left, right) "–" Button 1 ON OFF 2 x1 ON OFF 3 ON OFF "+" Button 12:00 PM x1 Mon 405.01.200 6 ON OFF 12:00 PM From 05.01.
<> appears on various screens as a prompt to create something new (Area, Profile, Event, etc.) x1 AREA << NEW >> Back x1 Home All Devices x1 x1 PROFILE Stand By 1 Home Back Menu ON OFF 2 ON OFF 3 ON OFF ON OFF ON OFF ON ON OFF OFF ON ON OFF OFF ON OFF selecte Back (3) x1 OFF OFF OFF OFF OFF OFF Area #1 The Filter is used when you wish to view only checked Bedroom devices, or only unchecked devices from a list.
ICON DESCRIPTION Undefined device Center button Single choice (radio button) - not chosen Single choice (radio button) - chosen Multiple selection (checkbox) - not selected Multiple selection (checkbox) - selected Remote Control Zone/Scene Controller (Single or Multibutton) Dimmer Switch Thermostat Buzzer OFF (indication) Buzzer OFF Buzzer ON Error Indication Filter (data on screen is filtered) Battery Power STARTUP Upon initial power up of the RZCPG, the VIZIATMRF logo will appear briefly.
INSTALLATION CHECKLIST Leviton provides the Installation Checklist as a step by step tool to setup your ViziaTMRF network and recommends following these steps in order, specifically if you are a first time user. System design will impact performance, so it is necessary to include and update your devices in a specific order to ensure overall system performance and reliability. The Installation Checklist steps are shown below.
OFF ON Menu OFF OFF Stand By OFF Menu OFF Stand By OFF OFF OFF OFF Menu x1 -RZCPGDefault Profile 1. Area #1 2. Area #2 3. Area #3 4. Area #4 ON 2 Include OFF Controller 4STEP ON NOTE: The INSTALL CHECKLIST screen will appear with the selection box around STEP 2 - Include Controller when NEXT STEP is chosen from STEP 1. 6 x1 -RZCPGDefault Profile 1. Area #1 2. Area #2 3. Area #3 4.
x1 1 2 3 4 Press the PM center button on the x1 12:00 RZCPG M o n 0 5 . to 0 1 .bring 2 0 0 6 up the INCLUDE INCLUDE CNTRLLER Place controller CNTRLLER screen, where you will program mode be prompted to place the controller in See Instruction sheet Profil e in Default program mode. Stand By Menu Begin? Press NOTE: Leviton Controllers require Return an inclusion process that differs from Dimmers, Switches and PlugIn Modules.
x1 The RZCPG will prompt you to UPDATE stand within 3 feet of that controller. Please stand within Press the right soft key (YES) 3 ft from controller to update your controller. NOTE: and press YES It is important that you remain to continue within 3 ft. of the controller NO YES you've selected from the list. If you are unsure about which x1 controller you are updating UPDATE you can use the "Who Is" Node Updated! Node ID #4 command (see pg. 13).
Scroll to and press the center x1 button to select Add Devices AREA #1 which will bring up a list of the Bedroom dimmers and switches you Bathroom included in Step 1 to add to your Hall new area. Scroll to each device selected 1 check box and use the and Back (3) Who Is buttons to either add or subtract1 1 each device from your area. 2 2 x1 NOTE: You can use the 3 3 AREA 4 ON button 4 ON 4 on OFF the bottom << NEW >> 4 Area #1 of the RZCPG to select ALL devices simultaneously.
OFF x1 SECURITY 1. Setup Password 2. < OPEN > SECURITY OFF OFF x1 OFF Save OFF Back OFF OFF 2. Include Controller 3. Update Controller 4. Create Areas 5. Set Associations 6. Security Back Next Step OFF OFF Menu x1 INSTALL CHECKLIST 1. Setup Password 2.
Press right soft key (Save) to complete. NOTE: Selecting will lock the RZCPG. When you return to the HOME screen you will not have access to the MAIN MENU nor any screens until you press the right soft key and enter your password. Selecting will only lock System Setup, preventing one from changing how the system is configured until the password is entered upon prompt.
MAIN MENU SCREEN Pressing the right soft key while on the HOME screen will bring up the MAIN MENU screen where you can navigate through the various selections to edit or change settings. x1 x1 MAIN MENU MAIN MENU 1. Device List 2. Who Is 3. Area 4. Profile 5. Settings 2. Who Is 3. Area 4. Profile 5. Settings 6. System Setup Home Back Home Back DEVICE LIST x1 Selecting 1.
AREA Selecting 3. Area from the MENU screen will bring you to the AREA screen. You can create a new area, rename an existing area, modify devices in an area or delete an area (refer to Step 4 of INSTALLATION CHECKLIST - Create Areas pg.9).
-RZCPGDefault Profile 1. Area #1 2. Area #2 3. Area #3 4. Area #4 Stand By Menu 1 ON OFF 2 ON OFF 3 ON OFF 4 ON OFF OFF OFF OFF OFF OFF x1 -RZCPGDefault Profile 1. Area #1 2. Area #2 3. Area #3 4. Area #4 1 ON 1 ON 2 ON 2 ON 3 ON 3 ON x1 Stand By Default Profile Default Profile Stand By OFF Menu Menu Mon 05.01.200 6 x1 x1 12:00 PM Mon 05.01.2006 12:00 PM The HOME screen will display with your newly created profile.
SECURITY Sets the password and lock level for your RZCPG or System (refer to INSTALLATION CHECKLIST - Security pg. 11). BATTERY LEVEL Displays the battery level for your RZCPG as follows: 1. Select Battery Level. x1 BATTERY LEVEL - 2.88 + Back Home SYSTEM SETUP x1 Selecting 7. System Setup from the MAIN MENU screen SYSTEM SETUP 1. Install Checklist will bring you to the SYSTEM 2. Advanced SETUP screen. Selecting 1. Install Checklist brings you to the Installation Back Home Checklist (refer to pg. 5).
NETWORK Selecting 1. Network from the ADVANCED screen will bring you to the NETWORK screen. x1 x1 ADVANCED x1 NETWORK NETWORK 1. Network 2. Association 3. HAI Setup 4. RTS Devices 5. Utilities 1. Include Node 2. Exclude Node 3. Ntwk Rediscovery 4. Update Devices 5. Remove Failed 5. Remove Failed 6. Join Network 7. RZCPG Utils 8. Replace Node 9. Dev Properties Back Back Back Home Home Home 1. Include Node (refer to INSTALLATION CHECKLIST pg. 5) 2.
x1 as a secondary remote to the network. Press the right REMOVE FAILED soft key (YES) after the Bedroom prompt to continue. NOTE: Node 2 Remove? This step will erase any existing data in the remote. YES NO You will then be required to include this remote with your x1 primary controller. Follow JOIN AS SECONDARY the controller inclusion/ WARNING! replication process of This step will erase all the data your primary controller Continue? (for RZCPG see pg. 7).
data. Follow the prompts to x1 RX DATA complete this process. Setup Data NOTE: Update DB (no. 3 Areas Profiles and 4) are only available on secondary RZCPG remotes. Select receive items Start? Press 3. Update DB (Man) is used Back Home to manually perform a database update (devices in the network, their names and types) for a secondary remote that has joined the network. It will require you to press buttons on each individual device you wish to update in your secondary remote. 4.
9. Device Properties This feature will display information about a particular device (Name, Node ID and Description) when selected from the list. R C x1 x1 PROPERTIES PROPERTY RZCPG Bedroom Hall Room Controller Name: RZCPG NID: 001 Cntrl Room Portable Remote Mfg. by Leviton Back (4) Home Back Home ASSOCIATION Selecting 2. Association from the ADVANCED screen will bring you to the ASSOCIATION screen. NOTE: Consult ViziaRF application guide for advanced ASSOCIATION options.
UTILITIES Selecting 5. Utilities from the ADVANCED screen will bring you to the UTILITIES screen. x1 UTILITIES 1. Who Is 2. Version 3. Rediscovery 4. Dev Properties 5. Reset Back Home x1 UTILITIES 3. Rediscovery 4. Device Property 5. Reset 6. Test ZW x1 7. Test CR Back Home 12:00 PM Mon 05.01.200 6 1. Who Is... x1 (refer to WHO Is... pg.13). VIZIA RF V1.09 Z-Wave 2.06 Profile 2.
NOTES
LIMITED 5 YEAR WARRANTY AND EXCLUSIONS Leviton warrants to the original consumer purchaser and not for the benefit of anyone else that this product at the time of its sale by Leviton is free of defects in materials and workmanship under normal and proper use for five years from the purchase date.
This page is NOT to be printed in the booklet LEVITON INSTRUCTION SHEET/MANUAL SPECIFICATIONS DI-104-RZCPG-20A-X1 Black Helvetica 40 lb. offset Paper size: 5.75" x 6" (Printer Spread) Overall size: Final fold size: 5.75" x 3" (booklet - saddle stitch) DOCUMENTATION N/A LG 12/19/06 6" Saddle Stitch 5.75" 2 3 OVERALL SIZE 3" Cat. No. 5.