Cut Sheet

ManualsBrandsLeviton ManualsDual Relay Occupancy SensorsOccupancy Sensor, Dual Relay, PIR/Ultrasonic, White

OSSMD-FTW

Color:

White

UPC Code: 07847740298

Country of Origin: Mexico - *Eligible for

ARRA funded projects > $7,443,000

Occupancy Sensors

Brand Features

The OSSMD provides automatic lighting control for two separate loads from a single

unit. It is compatible with incandescent, fluorescent, low-voltage lighting, and fan loads.

The unit features dual manual-override switches that can be used to toggle the ON/OFF

status of each lighting load while an area is occupied. The OSSMD can be installed in

place of two single-pole wall switches and fits in a standard single-gang wall box.

Item Description

Product Line: OSSMD, Technology: Multi-Technology PIR/Ultrasonic, Switch Type:

Single-Pole, Dual Relay, Fan Model, Mounting: Wall Switch, Device Type: Occupancy

Sensor, Coverage (Sq.Ft.): 2400 Sq. Ft., Pattern: 180°, Color: White, Warranty: 5-Year

Limited

Technical Information

Product Features

Product Line: OSSMD

Technology: Multi-Technology

PIR/Ultrasonic

Switch Type: Single-Pole, Dual Relay,

Fan Model

Mounting: Wall Switch

Device Type: Occupancy Sensor

Grade: Commercial

Coverage (Sq.Ft.): 2400 Sq. Ft.

Pattern: 180°

Mounting Height (Ft.): 4 Ft.

Adjustment: Self-Adjusting

Time Delay: 30s-30m

Voltage: 120/277 Volt AC 60Hz

Number of Relays: 2

Load Rating: 800W@120V INC

1200VA@120V 2700VA@277V FL

Secondary Relay: 800W@120V INC

800VA@120V 1200VA@277V FL

Motor: 1/4 HP @ 120V

Power Pack: External Power Pack Not

Required

Consumption (mA): N/A

Photocell: Internal

HVAC Relay: N/A

Operating Temperature: 0°C to 50°C

Storage Temperature Range: -10°C to

85°C

Relative Humidity: 20% to 90% non-

condensing

Neutral Wire Connection: Required

Color: White

LED Color: Green and Red

Wallplate: Order Separately

Standards and Certifications: ETL/C-

ETL

Code Compliance: California Title 24

Size: 4.06" H x 1.75" W x 1.85" D

(103.2mm x 44.4mm x 47.2mm)

Warranty: 5-Year Limited

Summary of content (3 pages)

PAGE 1
OSSMD-FTW Occupancy Sensors Brand Features The OSSMD provides automatic lighting control for two separate loads from a single unit. It is compatible with incandescent, fluorescent, low-voltage lighting, and fan loads. The unit features dual manual-override switches that can be used to toggle the ON/OFF status of each lighting load while an area is occupied. The OSSMD can be installed in place of two single-pole wall switches and fits in a standard single-gang wall box.
PAGE 2
Features and Benefits · Provides automatic lighting control for two separate banks of fluorescent, incandescent, or low-voltage lighting from a single unit. · The second relay is a manual-ON only with a maximum 30 minute time-out for maximum energy savings to comply with CEC Title 24. · The OSSMD-FT is intended to control a light circuit and a fan. The button on the sensor provides ON control for both circuits and OFF for lighting circuits only.
PAGE 3
· Exclusive Leviton High Inrush Stability (H.I.S.) Circuitry. Specifically designed to handle today’s high inrush electronic ballast loads and offer unmatched durability and service. · One unit can be used for 120V through 277V lighting. Compatible with both electronic and magnetic ballasts. · True zero-cross relay switches at the zero crossing point of the AC power curve to ensure maximum contactor life and compatibility with electronic ballasts. Leviton Manufacturing Co., Inc.