Specification

PRODUCT DATA
Provolt™ Series PIR Occupancy Sensors
Provolt™ Series Passive Infrared
(PIR) Occupancy Sensors
DESCRIPTION
The Leviton Provolt™ Series combines line voltage
occupancy sensors and photocells into a self-contained
unit. The integrated design alleviates the need for
separate power pack and occupancy sensor wiring
making it a low-cost, efficient energy solution for new
construction and retrofits. For true daylight harvesting
applications, integrated photocells provide consistent
daylight design levels by actively switching the
connected load(s) ON and OFF in response to available
natural light to maximize energy savings. Vacancy
timers continually analyze and adjust to changing
conditions using the latest microprocessor-based
technology to optimize performance. Auto-ON/auto-
OFF automatically turns lights ON and keeps them ON
when occupancy is detected and automatically turns
lights OFF when the space is vacant or unoccupied. Wire
terminals allow for simple connection to a line-voltage
circuit and are ideal for existing buildings with limited
access to wiring and new construction.
APPLICATIONS
• Daylight harvesting
• Meets energy code requirements for CA Title 24
• Auto-ON/auto-OFF
• Manual-ON/auto-OFF
FEATURES
• Uses industry-exclusive digital (4 element)
PIR circuitry for fewer false triggers from
unwanted sources such as HVAC systems
A Fresnel lens establishes dozens of
detection zones requiring the heat source to move
from one zone to another to trigger the sensor
• Auto-adapting: time delay and sensitivity
are continually adjusted to occupancy
pattern of use
• Configurable for manua- ON/auto-OFF or
auto-ON/auto-OFF
• Vacancy Sensing Time Outs:
- Delayed OFF timer: the sensor will turn lights
OFF if no motion is detected after a specified
time
- Exclusive walk-through feature: provides
increased energy savings by not leaving the
lights ON for an extended period after only
momentary occupancy
- False Detection Timer: (M/T) the PIR scans for
movement and shuts lights off after 31 minutes
preventing false triggers from HVAC systems
• Output short circuit protection
• Industry-exclusive self-configuring local manual
switch input: momentary or maintained switches are
supported
• Presentation mode feature for slide or film
presentations allows push buttons to turn lights OFF
and keep them OFF while the room is occupied
• Adjustable time delay: 30s, 5min, 10min, 20min,
30min
• Test mode for simplified commissioning
• Manual Switch and Emergency Override are Class
1 and Class 2 circuits. Class 2 circuits provided for
flexibility.
• Industry-exclusive “fail-safe” circuitry: in the event
of product failure, Return-to-Closed feature causes
the relay to default ON which eliminates life safety
concerns
• Industry-exclusive H.I.S. (High Inrush Stability)
technology designed to handle today’s high
in- rush electronic ballast loads and offer matched
durability and service
Light Pipe
Leviton Manufacturing Co., Inc. Global Headquarters
201 North Service Road, Melville, NY 11747-3138 tech line 800-824-3005 fax [phone]
©2016 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.