Specification

PRODUCT DATA
Leviton Mfg. Co., Inc. Lighting Management Systems
20497 SW Teton Avenue, Portland, OR 97062 1-800-736-6682 Tech Line: 1-800-959-6004 Fax: [phone] www.leviton.com/lms
© 2008 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.
The Leviton-NSI IF 501 Control Interface is your
simple solution for dimmer and control systems
compatibility. Increased flexibility of control system
design is achieved with the multiple signal ports and
protocols available with the IF 501. The IF 501 may
be configured to combine and convert analog,
analog multi-plex and digital control signals.
In addition to interfacing a variety of control signals,
the IF 501 is programmable as a stand-alone auto
sequence control device. Eight preprogrammed
crossfading chase effects with step times from 1
to 60 seconds may be selected. A precision 20 cue
sequence with fade and wait times from .1 second
to 50 minutes may be programmed into the non-
volatile memory via the RS-232 port and triggered
remotely.
2.1000
4.2000
6.6240
4
321
I/O-INI/O-OUT
MICROPLEX
RS-232
ET
R
RT
A
S
MIDI/ANALOG LUMA-NET
INOUT
DMX / AMX
P
R
W
CONFIGADDRESSDC PWR
SEE INSTRUCTION MANUAL
I/F 501CONTROL INTERFACE
PUSH
IF 501 Control Interface
IF 501 Control Interface
Dimensional Data – in. [cm] lbs. [kg]
Width 6.62 [16.81]
Depth 4.2 [10.67]
Height 2.1 [5.33]
Shipping Weight 4 [1.82]