Cut Sheet

UPC Code : 078477999387
Country Of Origin : Mexico
LDS30-ACC
®
30/32 Amp 600 VAC Non-Fused Non-Metallic Disconnect Switch with Local and
Remote Monitoring Inform Technology. Remote monitoring communicated via Wi-
Fi requires internet connection. IP66/IP67/IP68/IP69K Rated, NEMA Type 3R, 4X, 6,
6P, 12, 13 Watertight Enclosure, NSF Certified, Includes Factory Installed Auxiliary
Contact (AUXNO)
How does Inform Technology work? Sensors are embedded
into Leviton devices to monitor device health. Data from
sensors can be viewed locally or remotely
-
Local monitoring – Green LEDs on the cover provide a visual
indication that the device is operating under normal conditions,
flash red if there is a failure, or flash yellow if there is a buildup
of liquid inside of the enclosure that may lead to a potential
failure
-
Remote monitoring via Wi-Fi – includes data like liquid
accumulation, enclosure temperature and humidity, line- and
load-side voltage values, ground continuity, and more. Access
this data 24/7 and get notified of any abnormal operating
conditions via the Inform app (mobile and desktop)
-
Compatible with Wi-Fi® 802.11 a/b/g/n networks @ 2.4GHz and 5GHz with WPA or
WPA2 security.
If using a variable frequency drive (VFD), it must be installed between the disconnect
switch and the motor.
Learn more about our Powerswitch® industrial switch portfolio >>
Learn more about Inform Technology >>
Technical Information
Standards and Certifications
CE : CE Marked
IEC : 60529
ISO : 20653
Ingress Protection : NEMA/UL 50E
Type 3R, 4, 4X, 6, 6P, 12, 13 IEC IP66,
IP67, IP68, IP69 IP69K
NEMA : 250
NOM : NOM-ANCE
NSF : 14159-1, Hygenic Requirement for
the Design of Meat & Poultry Processing
Equipment
cULus : cULus UL60947-4-1A (Suitable
as Motor Disconnect)
Electrical Specifications
Amperage : 30/32 A
Current Interrupting : Certified for full-
rated current and voltage
Dielectric Voltage : 1000 V plus twice
rated voltage for 1 minute
Endurance : 6,000 operating cycles at
rated current and voltage
Voltage : 600 VAC
Environmental Specifications
Operating Temperature : -40°C to 75°C
UV Resistance : Exposed materials are
UV stabilized
Material Specifications
Enclosure Material : PBT+PC
Enclosure Screws : Stainless Steel
Gasket : Silicone Rubber
Handle Material : PBT+PC with TPE
Overmold
Mounting Feet : PBT+PC
Mechanical Specifications
Device Type : Safety Disconnect Switch
Feature : LED Indication, Wi-Fi Enabled,
Factory Installed Auxiliary Contact
Product ID : Ratings are permanently
marked on device
Screw Terminal Torque : 7 in-lb (0.8
N·m) for Switch/ 15 in-lb (1.7 N·m) for
Neutral and Ground