Cut Sheet

Cat. No. Description
EVP32-M81
Evr-Green
®
32 Amp, 7.7kW output, 18’ charging cable & Pedestal Mounting Pole and Base
(Includes (1) EVPED-002 & (1) EVB32-M8L)
EVPED-002 Pedestal Mounting Pole and Base
EVB32-M8L
Evr-Green
®
320 Charging Station: 32 Amp, 7.7kW output, 18’ charging cable, cord-connected (plug-in).
For hard-wired applications, remove plug tail as directed by installation guide.
Ordering Information
Additional tools required for installation not included with purchase:
n Box wrench sized for anchor bolts
n Spanner driver
n Flat blade screwdriver
n Flexible liquid tight conduit cutter
n Wrenches appropriately sized for the hardwire hub and the flexible liquid tight
conduit fitting
n ¾” knockout cutter
n Wire cutter
n Wire stripper
Installation Preparation - Additional parts/equipment required for installation
not included with purchase:
n Leviton Evr-Green
®
320 Charging Station
n 1” hub
n 1” to ¾” reducing bushing
n ¾” flexible liquid tight conduit fitting
n ¾” flexible liquid tight conduit (approx. 8-1/4”)
n Dedicated 208 or 240 VAC branch circuit
n Circuit breaker appropriately sized for the EVSE charger
(refer to EVSE Installation Guide)
n Two line conductors: Appropriately sized for the EVSE current
capacity and in accordance with local and current NEC electrical codes
n One ground conductor: Appropriately sized for the EVSE current capacity
and in accordance with local and current NEC electrical codes
n 3/8” stainless steel 18-8 anchor bolts with required nuts and washers or
acorn nuts (4)
n Anti-Seize compound (recommended for use on all bolts and nuts)
n Optional disconnect switch can be added to installation
Leviton Manufacturing Co., Inc.
201 N Service Rd, Melville, NY 11747
Telephone: [phone] • FAX: [phone]
© 2014 Leviton Manufacturing Co., Inc. All rights reserved.
Visit our Website at:
www.leviton.com/evrgreen
email: [e-mail]
112514
Q-937