User Guide

1 2 3 4
65 7 8
An iOS (12.0 or later) or Android (8.0 or later)
mobile device.
NOTE: Make sure Wi-Fi and Bluetooth are enabled on
your mobile device.
A My Leviton cloud account
(set up through the My Leviton app).
A 2.4GHz Wi-Fi network with high
speed internet.
Installation requires electrical knowledge.
If you are unsure of any steps, consult an electrician.
Getting Started Guide
Cat. No. D215S
SWITCH
2
ND
GEN
See the complete line of My Leviton
TM
app compatible
dimmers, switches, plug-ins, and controllers at
leviton.com/decorasmart
Features
Before you install Identify your wires
What you need to make
it work:
Your switch
works with:
Leviton’s second-generation
Decora Smart Wi-Fi Switch makes
it easier than ever to control your
lights how you want. Use your
voice with Amazon Alexa, Google
Assistant, or Apple Siri — or
use your smartphone or tablet
to control lighting with the My
Leviton app, even when you’re
away from home.
The Decora Smart Wi-Fi Switch
looks right at home with your
other Decora devices and can
be combined with other Decora
Smart Wi-Fi devices to create a
Whole Home experience with room
scenes, activities, and schedules
for connected lights to match
your lifestyle.
• General purpose loads up to
15 amps, for specific ratings see
the chart below.
• Do not use your switch with metal
wall plates or aluminum wire.
• Additional self-service support
options can be found in the
My Leviton app or
at leviton.com/decorasmart.
RATINGS
General Use 15A, 120VAC, 60Hz
LED / CFL / Electr
onic Ballast 5A
Incandescent / Halogen 1500W
Magnetic Ballast 15A
Motor 3/4 HP
Operating Temp 0°C - 40°C (32°F - 104°F)
Operating Humidity 0 - 90% non-condensing
NETWORK
Wi-Fi 802.11 b/g/n networks - 2.4GHz only
Security
WPA, WPA2, or WPA3 security, or open
Bluetooth v5.0
MY LEVITON APP
iOS version 12.0 or later
Andr
oid version 8.0 or later
DI-000-D215S-02A
Rocker
• Press the top to turn ON.
• Press the bottom to turn
light OFF.
Status LED
• Illuminates when the lights
are off so you can find the
switch in the dark.
• Provides connectivity and
device status feedback.
• Advanced settings available
in the My Leviton app.
Check your wall box:
1. Remove wallplate and disconnect existing switch.
2. Restore power. Carefully test wires with voltage tester to
find the line (hot) wire.
3. Turn off power at the circuit breaker.
4. Mark the wires as shown below. Please note neutral wires
are required to operate this device.
Quick tip: Neutral wires are typically white and will be
found bundled inside the electrical box.
Single pole installation:
1. Work only one connection at a time.
2. Connect wires as shown using the included
wire connectors.
1. Restore power. Status LED should flash GREEN indicating
your switch is ready to be enrolled.
2. After powering on the switch to confirm it is receiving
power, turn the power back off again at the breaker prior
to completing the installation.
Wire your switch
Test and install
Welcome
Things to consider:
To control the switch from more than one location such
as in a 3-way or multi-way, you will need either a wired
DD0SR Companion device, or a wireless DAWSC Anywhere
Companion device. See Switch Companion instructions for
connection directions.
If your wall box looks different, call an electrician.
If your wall box contains a different wiring
configuration, contact Leviton’s technical support
team or consult an electrician.
WARNING: TO AVOID FIRE, SHOCK OR DEATH, turn off
power at the circuit breaker.
NOTE:
• Neutral connection is required.
• The YELLOW/RED traveler wire is only used in 3-way
applications; remember to put a wire connector on the
YELLOW/RED traveler wire even if not in use.
If you need help...
ONLINE
decorasmartsupport.leviton.com
CHAT
www.leviton.com/support
EMAIL
[e-mail]
CALL
1-800-824-3005 (USA)
1-800-405-5320 (Canada)
Easy Wi-Fi lighting
control for the
whole home
CHAT
www.leviton.com/support
CALL
1-800-824-3005 (USA)
1-800-405-5320 (Canada)
ONLINE
decorasmartsupport.leviton.com
EMAIL
[e-mail]
We are here to help
LINE
LOAD
TRAV
NEUTRAL
GND
GROUND
GROUND
NEUTRAL
To Light
To Light
From
From
Branch Circuit
Branch Circuit
LOAD
LOAD
NEUTRAL
GROUND
GROUND
LINE
LINE
TRAVELER
TRAVELER
GROUND
GROUND
NEUTRAL
LOAD
LOAD
LINE
LINE
To Light
To Light
From
From
Branch Circuit
Branch Circuit
Leviton Manufacturing Co., Inc.
201 North Service Road, Melville, NY 11747
© 2021 Leviton Manufacturing Co., Inc. All rights reserved.
Specifications subject to change at any time without notice.
WEB VERSION