Specification

2
CD100
Leviton Mfg. Co., Inc.
59-25 Little Neck Pkwy • Little Neck, NY 11362-2591 • Tech Line: 1-800-824-3005 • Fax: [phone]
Visit our Website at: www.leviton.com
INSTALLATION
DALI Loop
• Only one power supply is used per loop
• Control wiring can be Class 1 or Class 2 installed
• Polarity-independent control wiring
• Flexible 2-wire DALI loop control wiring - Daisy Chain, Point
to Point, Star or Mix Method.
• Run low-voltage wires separately from line voltage
(if applicable).
High Voltage Class 1 Wiring
Connect wires in junction box using standard
wiring practices.
4" SQUARE
ELECTRICAL BOX
JOB NAME:
JOB NUMBER:
CATALOG NUMBERS:
SPECIFICATION SUBMITTAL
G-6383A/B2/eg
ON OFF
ON OFF
ON OFF
ON OFF
120V LINE-BLACK
DALI
Loop Wires
NEUTRAL-WHITE
277 LINE-ORANGE
RED
PURPLE PURPLE
BLACK
DALI
Scene/Group
Controller
CD100
Power Supply
DALI Ballast
DALI Ballast DALI Ballast
*DALI Loop wires are polarity independant
*Controllers and Power supply can be connected at any point on the Dali Loop
©2002 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice