Cut Sheet

COMPONENT SPECIFICATIONS
5Wxxx-xxC
Opt-X
®
SDX Wall-Mount Enclosures
Small, Medium, and Large
5Wxxx-xxC
APPLICATION
Opt-X SDX Wall-Mount Enclosures allow for inter-connect
or cross-connect between cable and active equipment
while using minimum wall space. The enclosure features
and design allow for easy eld termination of connectors,
splicing, or pre-terminated plug-and-play solutions. The
ber enclosures are primarily used in controlled indoor
applications, such as in entrance facilities, equipment
rooms, and telecommunications rooms.
SPECIFICATION
Opt-X SDX Wall-Mount Enclosures shall be available
in multiple sizes to accommodate eld connector
termination, heat-fusion splicing, and plug-and-play
MTP
®
cassettes for up to 288 bers (LC). Large-size
enclosures can be retrotted in the eld to a splice-only
conguration for up to 576 heat-fusion single or 1728
Ribbon splicing. Enclosures can be oriented for left- or
right-side patching to provide added exibility. Adapter
bulkhead shall accept Opt-X SDX Precision-Molded
Adapter Plates, SDX Splice Modules, and SDX MTP
Cassettes in LC, SC, ST, and MTP connectivity. Fiber
cable management for routing, storage, and protection
shall accept tight-buffered ber and backbone cables.
Enclosures shall be constructed of 16-gauge steel with a
powder-coated black nish and be mountable on a wall.
An optional key/lock kit shall be available to lock
the service side door or both service-side and
customer-side doors.
FEATURES
• Dual doors (service side and customer side) with slam latches for
ease of access
• Low-prole (depth), small-size enclosure minimizes protrusion
from the wall
• Large-size enclosure can be retrotted in eld for splice only
enclosure (accepts up to 24 splice trays)
• Accepts SDX Adapter Plates, Splice Modules, MTP Cassettes,
and Splice Trays for multiple solution capabilities
• Removable cable entry/exit grommets allow for pre-terminated
ber trunk install, cable protection, and minimizes dust buildup
• Constructed of 16-gauge steel for enhanced durability
• Ground lug provided for added cable strain relief protection and
grounding of armored cable
• Optional cable strain-relief mounting kit (installed on service side)
protects incoming ber cable
• Optional key/lock kit secures service-side door or service-side
and customer-side doors
• Optional HDX-to-SDX conversion adapter bracket accepts HDX
Adapter Plates and HDX Cassettes
DESIGN CONSIDERATIONS
• Enclosures are sold empty (unloaded)
• Capable of storing up to three meters of 900 μm tight-buffered
ber per adapter
• Enclosures are powder-coated black (custom white available)
• Enclosures include an accessory kit consisting of VELCRO brand
cable ties, mounting screws, cable managers, port ID labels,
blank plates and CAM lock (for splice-only enclosure)
STANDARDS COMPLIANCE & FIBER DENSITY
Meets or exceeds all ANSI/TIA-568.3-D requirements
PHYSICAL SPECIFICATIONS
Dimensions:
• See page two
Materials:
• Enclosures: 16-gauge steel, powder-coated black, white logo
• Cable entry/exit grommet: santoprene
Page 1 of 3
Released February 2018
Leviton Network Solutions
2222 - 222nd St. SE
Bothell, WA 98021-4416
tel [phone]
tel [phone]
[e-mail]
www.leviton.com
Asia / Pacic
T +1.631.812.6228
E [e-mail]
Canada
T +1.514.954.1840
E [e-mail]
Caribbean
T +1.954.593.1896
E [e-mail]
China
T +852.2774.9876
E [e-mail]
Colombia
T +57.1.743.6045
E [e-mail]
Europe
T +44.0.1592.772124
E [e-mail]
India / SAARC
T +971.4.886.4722
E [e-mail]
Mexico
T +52.55.5082.1040
E [e-mail]
Middle East & Africa
T +971.4.886.4722
E [e-mail]
South Korea
T +82.2.3273.9963
E [e-mail]
Copyright © 2018 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.
Small Wall-Mount
Medium Wall-Mount
Large Wall-Mount
FIBER DENSITY
Size
# of SDX
Components
MTP
(12f / 24f)
LC SC ST
Small 2 192 / 384 48 24 16
Medium 4 384 / 768 96 48 32
Large 12 1,152 / 2,304 288 144 96