Specification

Component
Specifications
3880-DIN
APPLICATION
The 1x9 Bridged Telephone Board, designed to fit into any Leviton
Structured Media™ enclosure, bridges up to four telephone lines
through to nine outlet locations, allowing operation of up to nine
separate telephones per line. Available as an expansion for Leviton's
Pre-Configured Structured Cabling Panels, or as a stand-alone module
on an ABS plastic bracket. Suitable for phone, fax or modem
applications.
STANDARDS COMPLIANCE
Meets or exceeds all applicable standards: UL recognized components.
PHYSICAL SPECIFICATIONS
Dimensions: 1x9 Bridged Telephone Board:
See second page for details.
Bracket:
See second page for details.
Material: 1x9 Bridged Telephone Board:
Printed Circuit Board
Bracket:
ABS plastic, white
DESIGN CONSIDERATIONS
• Fits easily into any Leviton Structured Media enclosure.
• Allows up to nine separate telephones per line.
•Available as an expansion board for any Leviton Pre-Configured
Structured Cabling Panel, or as a stand-alone module on an ABS
1x9 Bridged Telephone Board
1x9 Bridged Telephone Board
Part Numbers
47603-110
47689-B
2222 – 222nd St. SE • Bothell, WA 98021 USA •
Tel: [phone] • Fax: [phone] • Int'l Fax: [phone] • GSA Schedule Available
For Technical Support Call 1-425-485-4288; in USA call 1-800-824-3005
Spec sheets and updates are also available at www.levitonvoicedata.com.
See ELECTRONIC FILES for CAD files (.DXF, .DWG, MS-DOS.EPS) on disk
plastic bracket.
WARRANTY INFORMATION
•Two-year limited product warranty.
For ELECTRONIC Typical Specs see (.TXT) file on disk.
TYPICAL SPECIFICATIONS
The 1x9 Bridged Telephone Board shall meet or exceed all
applicable standards as UL recognized components. The board
shall be of printed circuit board construction and the bracket of
white, ABS plastic. It shall connect up to four separate telephone
lines to nine outlet locations. It shall be available as an
expansion board, or as a stand-alone module. The manufacturer
shall provide a two-year limited product warranty.