Cut Sheet

Component
Specifications
3880-DIN
110 Style Crossconnect Product
Wall and Rack Mount Wiring Bases and Kits
110 Style Crossconnect Product
Part Numbers
41DWX-xxx 41NB2-xxx
41AB2-xxx 41AWX-xxx
41DB1-xxx 41DR2-xxx
41DBR-xxx
APPLICATION
Used in building entrance facilities, telecommunications closets
and equipment rooms to provide fixed cross-connections for
voice, security and data applications—including high megabit
applications when used with Category 5e rated cabling. Wall
version mounts to walls or backboards in 50, 100 or 300 pair
densities. Rack version mounts on 19" distribution frames or
hinged wall-mount brackets
STANDARDS COMPLIANCE
Meets or exceeds all applicable standards: all components are UL
listed; comply with TIA/EIA-568-B.2 requirements; and meet FCC
Part 68.
PHYSICAL SPECIFICATIONS
Wall Mount-
Dimensions: 50 Pair Wiring Base (w/o legs):
1.66"H x 8.51"W x 1.42"D
50 Pair Wiring Base (w/ legs):
1.81"H x 10.7"W x 3.3"D
100 Pair Wiring Base (w/o legs):
3.44"H x 8.51"W x 1.42"D
100 Pair Wiring Base (w/ legs):
3.62"H x 10.7"W x 3.3"D
300 Pair Wiring Base (w/ legs):
10.83"H x 10.7"W x 3.3"D
Materials: 110 wiring bases are made of fire-retardant
plastic rated UL 94V-0; C-4 and C-5 connector
blocks are made of fire-retardant plastic rated
UL 94V-0 with solder plated IDC’s.
Rack Mount-
Dimensions: 100 Pair Panel: 1.73"H x 19"W x 1.75"D
200 Pair Panel: 3.46"H x 19"W x 1.75"D
300 Pair Panel: 5.23"H x 19"W x 1.75"D
Material: 110 wiring bases are made of fire-retardant
plastic rated UL 94V-0; C-4 and C-5
connector blocks are made of fire-retardant
plastic rated UL 94V-0 with solder plated
IDC’s; panel back plates are made of painted
black 16 gauge steel.
DESIGN CONSIDERATIONS
• Use where space limitations and low cost are factors.
• 110 wiring bases are available with or without standoff legs.
Legs can also be purchased separately (PN# 410L2-xxx).
• Kitted versions include 50, 100 or 300 pair bases with legs,
labels, label holders, C-4 or C-5 connector blocks.
• Port ID option: Use the label strips and holders provided with
the 300-pair wiring base, and Kit versions of these products.
• Mount on wall or backboard.
• Route cable bundles either adjacent to wiring bases, or
underneath units with legs.
• Route individually marked cables from both left and right sides.
• 89D mounting bracket is sold separately.
WARRANTY INFORMATION
For a copy of Leviton product warranties, log on to
www.levitonvoicedata.com/warranty.
For ELECTRONIC Typical Specs see (.TXT) file on disk.
TYPICAL SPECIFICATION
The cross-connect shall be Category 5e 110-style wiring bases,
mountable to wall or backboard to provide 110 termination
capable of supporting voice, security, and Category 5e data
applications, including high megabit and shared-sheath
applications when used with Category 5e rated cabling. The 110
rack-mount panels shall mount to a 19” distribution frame or
hinged wall mount bracket. The components shall be UL listed
and TIA/EIA-568-B compliant. Bases shall support 50, 100 or
300 pair densities with provision for TIA/EIA-606 compliant
labeling. Plastic bases and blocks shall be made of fire-retardant
plastic rated UL 94V-0.
See ELECTRONIC FILES for CAD files (.DXF, .DWG, MS-DOS.EPS) on disk
2222 – 222nd St. SE • Bothell, WA 98021 USA
Tel: [phone] • Fax: [phone] • Int'l Fax: [phone] • GSA Schedule Available
For Technical Support Call 1-425-485-4288; in USA call 1-800-824-3005.
Spec sheets and updates are also available at www.levitonvoicedata.com.