Cut Sheet
SPECIFICATION
The control panel wallplate shall have eight congurable
buttons and t in a dual-gang form factor. It shall be
all-metal construction and have a matte anodized
aluminum nish. The buttons shall be pre-congured for
power on/off, volume up/down, HDMI 1, HDMI 2, VGA,
and lock. Setup shall be via IR learning and include a
copy/paste function to expedite setup of multiple rooms
for larger projects. Installation shall not require additional
computer hardware, Internet access, or software.
Control panel shall include a key lock function to reduce
inadvertent operation in the eld. Volume buttons shall
operate by both single press and press/hold.
FEATURES
• Dual-gang form factor with matte anodized aluminum nish
• Rugged all-metal construction
• Pre-congured buttons integrate with Leviton HDMI and VGA
Autoswitching HDBaseT Extender Wallplate (41920-HRC):
• Power on (IR setup required)
• Power off (IR setup required)
• Volume up (IR setup required)
• Volume down (IR setup required)
• HDMI 1
• HDMI 2
• VGA
• Lock
• Simple setup with IR learning and single twisted-pair cable
connection
DESIGN CONSIDERATIONS
• Use with Leviton 41920-HRC HDMI and VGA Autoswitching
HDBaseT Extender Wallplate, 41920-HTR HDBaseT certied
receiver, and 41920-A01 or 41920-A70 mixing audio amplier for
a complete control and sound reinforcement system
• Power and communication via single category cable from
41920-HRC
• Maximum cable distance between control panel and
autoswitching extender wallplate is 70 meters (230 feet)
• Use 41920-K00 control panel set-up kit for conguration
of buttons using IR learning and for duplication of button
conguration for multiple rooms
• Fits standard NEMA 2-gang opening, minimum 4" square box
STANDARDS COMPLIANCE
• CE, FCC
PHYSICAL SPECIFICATIONS
Dimensions: 114.3 mm W x 114.3 mm H x 28 mm D
4.5" W x 4.5" H x 1.1" D
Materials: Metal enclosure
Temperature 0° C to 50° C (32° F to 122° F)
COUNTRY OF ORIGIN
China
WARRANTY INFORMATION
For a copy of Leviton product warranties, visit
www.leviton.com/warranty.
APPLICATION
Control HDMI
®
and VGA audiovisual systems with the
8-button Control Panel Wallplate. The panel is ideal
for mounting in classrooms and conference rooms
to replace or augment remote controls. It has pre-
congured buttons for display or projector on/off, volume
up/down, and source selection. Buttons can be set up in
minutes using the display or projector remote. The panel
complements the Leviton HDMI and VGA Autoswitching
HDBaseT Extender Wallplate (41920-HRC). It is
powered by and communicates with the Autoswitching
Wallplate via category cable.
PRODUCT SPECIFICATIONS
41920-CP8
8-Button Control Panel Wallplate
41920-CP8
Page 1 of 2
Copyright © 2018 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.
Revised April 2018
Leviton Network Solutions
2222 - 222nd St. SE
Bothell, WA 98021-4416
tel 1-800-824-3005
tel +1-425-486-2222
appeng@leviton.com
www.leviton.com
Asia / Pacic
T +1.631.812.6228
E infoasean@leviton.com
Canada
T +1.514.954.1840
E pcservice@leviton.com
Caribbean
T +1.954.593.1896
E infocaribbean@leviton.com
China
T +852.2774.9876
E infochina@leviton.com
Colombia
T +57.1.743.6045
E infocolombia@leviton.com
Europe
T +44.0.1592.772124
E customerserviceeu@leviton.com
India / SAARC
T +971.4.886.4722
E infoindia@leviton.com
Mexico
T +52.55.5082.1040
E lsamarketing@leviton.com
Middle East & Africa
T +971.4.886.4722
E lmeinfo@leviton.com
South Korea
T +82.2.3273.9963
E infokorea@leviton.com