Cut Sheet

QuickPort
®
2-Port Surface Mount Housing
Component
Specifications
3880-DIN
QuickPort
®
2-Port Surface Mount Housing
Part Number
41089-2xP
See ELECTRONIC FILES for CAD files (.DXF, .DWG, MS-DOS.EPS) on disk
APPLICATION
Compact housing for 1- or 2-port surface mounting of QuickPort
®
snap-in modules. Use to support voice/data applications in open
office, retrofit or other surface mount environments. (Connectors
sold separately.)
STANDARDS COMPLIANCE
Meets or exceeds all applicable standards: UL Listed; complies
with NEC® Article 800.
PHYSICAL SPECIFICATIONS
Dimensions: 2.52"H x 2.22"W x 1.10"D
Capacity: 1 or 2 snap-in modules
Materials: High-impact, fire-retardant plastic rated UL
94V-0
Mounting: Use screws (included), adhesive tape
(included), or magnet (PN# 41030-SMJ)
DESIGN CONSIDERATIONS
• Very small footprint.
• Can be used for 1- and 2-port applications.
• Specify whether the product will mount with adhesive tape or
screws or magnet.
• Specify side or rear cable entry. (Rear entry is recommended
to help meet cable bend radius standards).
• A blank insert is included to allow for future expansion.
• Specify port identification method (colored modules,
designation labels, and custom silkscreening are available). To
ID ports, use different colored connectors for each application
(13 TIA/EIA-606 compatible colors are available), or Leviton's
pre-printed Port Designation Labels.
• Security screw option.
UNIQUE FEATURES
• Very small footprint/profile.
• The housing base functions as a punchdown platform for
stabilizing connectors during termination.
• Includes a blank to allow for use as a 1- or 2-port device, and
allow for future expansion when only one port is initially used.
• Security screw option.
• Four color choices: ivory, white, grey and black.
INSTALLATION NOTES
• To install connectors: snap into base and terminate. Attach
base to desired surface (using screws or tape), and snap on
cover.
• The housing base doubles as a punchdown platform for
terminating connectors.
• If desired, connectors can be pre-terminated prior to snapping
into housing.
• Detailed installation instructions are included in the carton.
WARRANTY INFORMATION
For a copy of Leviton product warranties, log on to
www.levitonvoicedata.com/warranty.
For ELECTRONIC Typical Specs see (.TXT) file on disk.
TYPICAL SPECIFICATION
Surface mount telecommunications outlet housings shall be a
high-density low profile design with (2) two field-configurable
ports, snap-lock cover, and cable knockouts on back. Housing
cover shall have raceway knockouts for top and bottom entry.
Base shall include Tie-wrap anchor points at all cable entrances.
The housing shall be mountable with screws, tape or a single
magnet. The cover shall provide the option of securing it to the
base with a screw that is hidden under the outlet identification
window. Colors and configurations to be specified per schedule
on plan. Must be constructed of high-impact self-extinguishing
plastic rated UL 94V-0, and be UL Listed and compliant with FCC
Part 68 and TIA-568- B specifications.
2222 – 222nd St. SE • Bothell, WA 98021 USA
Tel: [phone] • Fax: [phone] • Int'l Fax: [phone] • GSA Schedule Available
For Technical Support Call 1-425-485-4288; in USA call 1-800-824-3005.
Spec sheets and updates are also available at www.levitonvoicedata.com.