LeveTop T1 Quick Start Guide V1.
Declaration Thank you for purchasing the LeveTop Drone. Please note that LeveTop T1 drone is a special control item and is forbidden for minors under the age of 18. In order to use LeveTop T1 drone better and to ensure your safety, please read this statement carefully before operation.
2. The user operates under conditions of poor physical condition or poor mental state such as drinking, drug use, drug anesthesia, dizziness, fatigue, and nausea. 3. Any compensation for mental damage caused by an accident. 4. Improper maintenance, unauthorized removal, repair, modification or replacement of non-LeveTop original accessories. 5. Unauthorized tampering with the supporting APP or drone software code. 6.
19. The user did not comply with local laws and regulations. 20. Other damages that are not within the scope of LeveTop responsibility. Attention： 1. USB charging must use the power adapter with an actual output of 5V 2A; 2. To ensure flight safety, the user who is in the beginner stage, suggest to install the Propeller Guards cover before take off; 3.
3. Do not use charging equipment that does not meet the requirements, otherwise there is a danger of explosion. Also, follow the instructions to properly dispose of used batteries. 4. While the flight, keep the drone in control of the sight line. Please pay attention NOT to touch the propeller while it is necessary to touch with your hand or other objects. In addition to the above, ensure that the drone always maintains a certain distance from people, obstacles, water surface, etc. 5.
Assembling Instructions ··Unfolding Arms Expand the four arms in the direction shown in the figure to make the arm and the body vertical; The safety connector will automatically lock the arm when the arm is fully unfolding. * To prevent any accidents, please adjust all the propellers manually to full deployment before takeoff. ··Folding Arms 1. Adjust the direction of the propeller to make sure the 2 propellers overlap and are placed directly below the arm; 2.
··Install Propeller Guards ··Insert TF card Align the propeller guards with the arm according to the position shown, and press down on the connection. To take a high-definition video or photo, insert the TF memory card in the direction shown. * Randomly do not equip with TF memory card, need to be purchased separately, up storage to 32G.
··Install the battery 1. Switching the arm and unfolding the propeller, assembling the propeller guards; 2. Align the battery with the metal contacts noted "POWER" as step 1 shows, to make sure fully insert the battery into the battery compartment; 3. Turn the battery cover into the locked position following in step 2. * After installing the battery, the drone has been powered into standby mode, please pay attention to safety. ··Disassembling the battery 1.
··Battery Storage ··Battery Charging 1. Connect the charging holder to your own USB charger with a standard Micro USB cable; 1. Turn the battery cover into the unlocked position, align the battery with the metal contacts with the “STORE”, and fully insert the battery. 2. Rotate the battery cover to lock it. * To carry and store the battery conveniently, LeveTop‘s battery could be powered or stored in the drone. 2.
··Power on /Power off Operating Instructions ··Preparation before takeoff Download LeveTop APP Please visit www.levetop.com to download and install LeveTop APP. Or search for LeveTop on APPLE STORE/GOOGLE PLAY and download the APP. IOS device users could scan the QR code as follows to download the APP. Install the battery, the drone is ready into standby. Remove the battery, the drone is powered off. * Please disassemble the battery and keep it in the safe place after the drone has finished flying.
··APP Flight Operation Instruction 1. Return 2. Setting 3. Flight mode 4. Emergency 5. Image 6. Video 13. One Button takeoff / landing 14. Follow Me 15. Throttle Acceleration 16. Clockwise 17. Throttle Deceleration 18. Anticlockwise 7. Camera 8. Left 9. Forward 10. Right 11. Backward 12.
··Takeoff 1. Install the battery； 2. Place the drone camera towards the user and make sure it is on the clearing and horizontal ground； 3. Open the LeveTop APP on your mobile device, click the “Enter Device” button, connect Drone Wi-Fi, name: LeveTop_XXXXX, Password: 12345678 ··Calibration * Move to the new outdoor location, it is necessary to re-verified the electronic compass; Electronic Compass Verification： 1. Go to the calibration page, and click on mag calibration； 2.
··Landing Click the button , the drone will land at the current location. ··Flight Mode Click for high speed mode, click for low speed mode. ··FollowMe ··Flight Operation Click , the drone will automatically follow the phone. ··One Button Return Click land. Use the virtual stick to control the flight. The left stick controls Up, Down, Turn Left and Turn Right. The right stick controls Forward, Backward, Left and Right.
Aircraft Diagram 1. Propeller Guards 5. Propeller 2. Arm 6. TF card slot 3. Safety Connector 7. Battery 4. Camera 8.
Packing List * Any different configurations subject to the actual product.
SPECS ··Battery & Power Battery Type:Li-Po 3S (Removable) ··General Voltage: Size: Folded Dimension: 86*86*148mm(3.4*3.4*5.8 inches) Unfolded Dimension: 237*237*148mm(9.3*9.3*5.8 inches) Diagonal Size (Propellers Excluded): 226mm (8.9 inches) Weight: 350g (0.77 lbs) ··Drone Flight Time: Max Speed: 11.4 V Capacity: 1500 mAh Flight Time: 20mins Charger： Input: 100-240 V; Output: 5V/4A; 12V/0.
FCC WARNING This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
