Operation Manual

15
Working with the Mastermind
4 Working with the Mastermind
4.1 Start a programme
Choose the desired group.
Choose the desired programme.
Press the green Start button.
4.2 Stop running programme
You can stop a programme to resume afterwards, by
pressing the red stop button or
choose options / short stop
4.3 End running programme
You can completely end a programme, by pressing the
red stop button for three seconds or
choose options / stop
Confirm your choice.
4.4 Manual control
You can set the oven to manual control.
choose menu / manual operation
Choose the desired preparation method
Set the desired values
Press start
4.5 Start delay of a programme
ou can also use a start-delay function on a programme.
Select the desired programme
choose start-delay
Set the time and date on which you want to start the
preparation
Confirm your settings
4.6 Change settings during preparation
During preparation you can change the settings.
choose options / correction
Increase the value of (for example) the temperature (on
the line) with or decrease with
Confirm the settings by pressing OK.
4.7 Table planner
During the preparation (also for manual control) you can
activate the cooking timer (table planner). With this
option you can set the cooking time for a product, plate
or tray in the oven. The table planner consists of eight
different independent cooking timers which you can start
during a preparation.
choose options / table planner
Now you can set eight different cooking timers
Select the desired cooking timer
Set the desired time
Press Start
Select in this way multiple cooking timers at your own
desires and set the preferred cooking times for each
product, dish, or tray.
You should remember yourself which timer corresponds
to which product, plate or tray.
4.7.1 Default value of the table planner
You can set all cooking timers at the same value. When
you are preparing the same products with the same
preparation time (eg. 5 min. 30 sec.), this can be an
interesting option for you.
Start the table planner during preparation and
choose options / set default time
Set the default time and confirm your settings.