User Manual

Help Manual
50
Fig.5 Video Window with Video Watermark overlaid
9.6 Move Watermark
9.6.1 Move to•••
If there is Watermark overlaid on the Video, this menu will be enabled.
Choosing Setup>Watermark••• command will bring up a Move dialog. Where one
can enter the X: and Y: offset value in their fields for the desired pixel move
distances.
9.6.2 Move to zero
If the Watermark was moved, this menu will be enabled. Choosing this menu will
move the Video Watermark to its original coordinates (0,0).
9.7 Rotate Watermark
9.7.1 Rotate to•••
If there is Watermark overlaid on the Video, this menu will be enabled.
Choosing Setup>Rotate Watermark>Rotate to••• command will bring up a Rotate
dialog, where one can enter an angle to Rotate the Video Watermark a specified
angle around the Video center (0, 0).