User Manual

Help Manual
30
command and the Layer menu in Sec.13 for details.
7.6 Paste Ctrl+V
Choose Edit>Paste command to put objects from the clipboard onto the active
image's Measurement Layer. One can also choose Edit>Paste command to transfer a
layer's Measurement objects from one image window's Measurement Layer to
another image's Measurement Layer.
Note: 1) Before executing the Edit>Paste command, valid Measurement object must
have been copied into the clipboard (see the Edit>Copy command). If there is no
Measurement object data in the clipboard, the Edit>Paste command will be disabled.
2) When the current layer is not the Background Layer, this command can be
activated as long as the clipboard has the Measurement object, otherwise, it is
disabled. This means that the command does not support the image area Edit>Paste
operation.
7.7 Image Select
The Edit>Image Select command can be used to mark ROI and Copy the selected
ROI to the clipboard. This command is only used to select the ROI on the Background.
Choosing Edit>Image Select command will turn the cursor into a “ ” shape.
To select an area, drag the mouse cursor across the image with the left button held
down until the area is selected. Release the button and the area will be marked.
Handles will appear on the area that will allow alter the selection after it is marked.
Choosing Edit>Image Select command will check this menu (or click on the