User Manual

Help Manual

This command will move the current displayed image to the previous Index listed in

the Undo/Redo sidebar (If it is not in the "Open" status).

Backward Demo

1. Choose Open Image••• to open an image;

2. Choose Image>Adjust>Auto Level command;

3. Choose Image>Adjust>Invert command The final image is shown in Index 3.

Since it is in the final step (Fig.3), the Edit>Backward will be enabled;

4. Choosing Edit>Backward, the image and the Index will return to Index 2 as shown

in Fig 2. Since it is in Index 2, Edit>Forward will be enabled;

5. Choosing Edit>Backward again, both the image and the Index will return to Index

1 as shown in Fig.1. Since it is in the 3rd step, Edit>Forward will still be enabled, but

Edit>Backward will now be disabled.

See Edit>Forward for further information.