User Manual

Help Manual

This command will move the current displayed image to the next step listed in the

Undo/Redo sidebar (If it is not in the final step).

Forward Demo

1. Open an image, choose Image>Adjust>Auto Level, choose Image>Adjust>Invert

and check Current on Index 1(Open Operation).

Now we continue the Edit>Forward demo. Since it is in Index 1, Edit>Backward is

disabled and Edit>Forward is enabled. The status is shown in Fig.1.

2. Choosing Edit>Forward, the image and the Index will advance forward to Fig.2.

Now Edit>Backward is enabled;

3. Choose Edit>Forward again to go to Index 3 as shown in Figure 3. Now

Edit>Backward is still enabled, but because it is in the final step, Edit>Forward is

disabled.

See Edit>Backward for further information.

7.3 Backward