User Manual

Help Manual
132
New: Clicking New will setup a new dye, this will invoke a dialog called New Dye.
Input your New Dye name and click Ok to end the dialog and click Cancel to cancel
the input. This will return to the Edit Dye List again and the new name will be the
default on in the Name list box. Try to set the Emissions wavelength, Excitation
wavelength, Color for your new dye.
Save: Click Save on Edit Dye List to save your dye selection
Close: Click the Close button to end the Edit Dye List dialog:
15.5 Auto Correction•••
Set the low and high ranges for Image>Adjust>Auto Level and Image>Adjust>Auto
Contrast menus. The default value is 0.5% for both, but ToupView suggests this
value be smaller than 1%.
See Image>Adjust>Auto Level and Image>Adjust>Auto Contrast for details.