User Manual

Help Manual
120
meaning.
Select the cursor shape from Cross, Point, and Null.
In the figure below, a cursor with Double horizontal and vertical lines with 9 Pixels
cross (for the alignment application, the longer one) and the Cursor as a Cross was
defined
15.1.6 Capture
If one wish to capture an image with many Measurement objects overlaid on the
Video window, the following settings should be defined first.
1. Choosing Options>Preferences••• command, a dialog called Preferences will be
brought up as shown below;
2. Clicking Capture page and then checking Capture with Marker and Watermark or
Capture with Measurement.
3. Click Ok to end the setup, or Apply to apply the setup, or Cancel to cancel the
setup.
After the above steps are finished, if there are Marker, Watermark or Measurement
objects overlaid above the Video or Image, choosing Capture>Capture Image or
clicking on the Camera sidebar will capture the image with Marker,