User Manual

Help Manual
110
coincide with the image shape.
Note: 1) To check or modify the parameters of the selected object, just select a single
measurement object and the Measurement sidebar will be activated automatically.
Here you can edit the corresponding object parameters to modify its properties;
2) The Appearance, Coordinates on Measurement sidebar will be enabled only
when a single object is selected. The Calculation will be effective for a single selected
object or more selected objects. Its calculated items will depend on the selected
objects type (The type could be the same or could be different).
14.10 Circle
14.10.1 Circle>Center+Radius
Choose Measurements>Circle>Center+Radius to draw circle with Center+Radius
method on the specified Layer. Its radius is C1@33583.88um.
Note: 1) To check or modify the parameters of the selected object, just select a single
measurement object and the Measurement sidebar will be activated automatically.
Here you can edit the corresponding object parameters to modify its properties;
2) The Appearance, Coordinates on Measurement sidebar will be enabled only
when a single object is selected. The Calculation will be effective for a single selected