User Manual

Help Manual
104
Here you can edit the corresponding object parameters to modify its properties;
2) The Appearance, Coordinates on Measurement sidebar will be enabled only
when a single object is selected. The Calculation will be effective for a single selected
object or more selected objects. Its calculated items will depend on the selected
objects type (The type could be the same or could be different).
14.3 Point
Move mouse to the point; click the left mouse to mark it. It will show the point Label
Px and its position x and y over the image.
Note: 1) To check or modify the parameters of the selected object, just select a single
measurement object and the Measurement sidebar will be activated automatically.
Here you can edit the corresponding object parameters to modify its properties;
2) The Appearance, Coordinates on Measurement sidebar will be enabled only
when a single object is selected. The Calculation will be effective for a single selected
object or more selected objects. Its calculated items will depend on the selected
objects type (The type could be the same or could be different).
14.4 Line
14.4.1 Line>Arbitrary Line
Draw Arbitrary Line between the two points on the specified layer.
1. Choose Measurements>Line> Arbitrary Line command;
2. Move mouse to the 1st point; click the left mouse to mark it;