Operation Manual

Setup

Mode Screen

Use this screen to change the mode between Router mode and Access Point mode.

Mode Screen

Select the desired option, and click "Save".

Router

In this mode, this device can provide shared Internet Access to all

your LAN users. Also, by default, it acts a DHCP Server, providing

an IP address and related information to all Wireless and LAN

users.

Access

Point

The device links your Wireless Stations to your wired LAN. The

Wireless stations and devices on the wired LAN are then on the

same network, and can communicate with each other without

regard for whether they are connected to the network via a Wireless

or wired connection.

You need to have a DHCP Server on your LAN to provide IP ad-

dresses to the Wireless clients using this Access Point.

Notes:

 Generally, you should NOT use access point mode. Only select this mode if

you are sure this is what you want.

 After changing the mode, this device will restart, which will take a few seconds.

The menu will also be changed, depending on the mode you are in.

 For details on using Access Point Mode, see Chapter 8.