Operation Manual

Access Point Mode

101

Mode Screen

Data - Mode Screen

Device

Name

This field displays the current name of this device.

Device

Mode

Select the desired device mode for the router:

 Router - In this mode, this device can provide shared Internet

Access to all your LAN users. Also, by default, it acts a DHCP

Server, providing an IP address and related information to all

Wireless and LAN users.

 Access Point - The device links your Wireless Stations to your

wired LAN. The Wireless stations and devices on the wired LAN

are then on the same network, and can communicate with each

other without regard for whether they are connected to the net-

work via a Wireless or wired connection.

After changing the mode, this device will restart, which will take a

few seconds. The menu will also change, depending on the mode

you are in.

IP Address

The IP Address of this device. Use the default value unless the

address is already in use or your LAN is using a different IP address

range.

Subnet

Mask

The Network Mask associated with the IP Address above.

Operation

Operation is automatic.

 Wireless clients can connect to the Access Point if they have the correct SSID

and security, but they must obtain an IP address from the DHCP Server on

your LAN.

Note: To use Schedule functions in Access Point mode, please make sure your

NTP settings are working under Router Mode.