Operation Manual

Chapter 4

Advanced Viewing Setup

This Chapter provides information about the optional settings and

features for viewing video via theFCS-0010/WCS-0010 Network

Camera. This Chapter is for the Camera Administrator only.

Introduction

This chapter describes some additional settings and options for viewing live Video:

• Adjusting the video image

• Controlling user access to the live video stream

• Making video available from the Internet

• Using the Motion Detection feature

Adjusting the Video Image

If necessary, the Network Camera Administrator can adjust the Video image.

To Adjust the Video Image:

1. Connect to the Web-based interface of the FCS-0010/WCS-0010 Network Camera.

(See Chapter 5 - Web-based Management for details.)

2. Select Administration, then Video Image. You will see a screen like the example

below.