Datasheet

FreeCon
WAB
WABWAB
WAB
-
3
000
Technical Specification
 External Ports
1 x 10/100 Mbps WAN Ethernet port
1 x 10/100Mbps LAN port
3 x External antenna ports
 WAN Ethernet Setting
Fixed IP
DNCP client
Supports 10/100 Mbps auto negotiation
 LAN Ethernet Setting
10/100 mbps full/half duplex auto negotiation
 Device Management
Web Server/ HTTPS
Supports SNMP v1, v2, v3 agent
Multiple user privileges
 Power
Input Voltage: 24 VDC
Injector input: 100~240 VAC, 50~60Hz
Power Consumption: 25W
 Environment & Safety
Operating Temperature: -5℃~+50℃
Storage Temperature: -40℃~+80℃
Operating Humidity: 0~95% non-condensing
EMI/Safety: FCC Class A, CE
 Physical Spec
Dimensions: 23.5cm(L) x 21.0cm(W) x 7.62cm (H)
Weight: 2.5 Kg(5.5lbs)
 LEDs
Power
WAN
WLAN1: Activity light/ Link Ind.
WLAN2: Activity light/ Link Ind.
WLAN: Signal Strength
 Wireless interface
802.11a/b/g for AP & bridge with Super G (Turbo A optional)
 Operation Mode
Access Point, Bridge/ Repeater
 Self-Forming, Self-configuring, self-organizing mesh
Up to 40 nodes
 Channel Number
Fixed or automatic select (optimum)
 Antennas
2 x 5dBi for 802.11a and 2.5dBi for 802.11b/g Dual band omni
directional antenna
 Enhanced Features
Multiple SSIDs, VLAN 802.1Q
802.11a Dynamic Frequency Selection
802.11a Transmit Power control
Load Balancing of Wireless Clients
 Security
WEP: 64/128/152-bit encryption
WPA-PSK
WPA (802.1x) –Dynamic Key
WPA2/ 802.11i
AES-CCMP: 128-bit encryption
Enable/disable broadcast SSID
MAC address filtering
Rogue wireless AP detection with email notification
 Wireless AP and wireless client activities monitoring
Signal strength
MAC address listing of wireless clients
 Tools and Utilities
Ping Utility – Trace route utility
Trace route utility
Firmware upgrade via web
Reboot device
Factory default
Product Diagram
Ordering Information
 WAB-3000: Wireless Mesh Outdoor AP/Bridge