KVM-8901 19” Widescreen LCD KVM Rack Console User Manual V1.
TABLE OF CONTENTS 1. Information........................................................................................................................................................... - 2 1.1 Overview ........................................................................................................................................................... - 2 1.2 Features .....................................................................................................................................
1. Information 1.1 Overview The LCD drawer, a modularized design, has a 19”-wide screen TFT LCD panel, a 105-key keyboard, and a touchpad. “KVM-8901” is the 3-in-1 model (LCD, Keyboard, and Touchpad), while “KCM-0832” and “KCM-1632” is the 4-in-1 model (LCD, keyboard, Touchpad and KVM). The power source of all the models is +12V DC-in from an external power adapter.
1.
1.3 Product Specifications Model Name KVM-8901 KCM-0832 KCM-1632 1 8 16 Numbers of Ports 482 x 610 x 44 Dimension (W x L x H), in mm Net Weight 20 KGS Gross Weight 24 KGS LCD 19 inch Wide Screen Display Size Panel Type TFT Resolution 1440 x 900 / 1366x 768 (16:10 / 16:9) View Angle H 85 / 85 V 85 / 85 500 Contrast Brightness 250cd/m2 Back light lifetime: 50,000 hrs 16.
2. Panel Control and OSD Function LCD OSD Menu-Tree 1. Color Auto-Tune (A): [1] Auto setting [2] Exit Menu (M) : [1] Activate OSD menu [2] Select the item a. Contrast b. Brightness c. Color Adjust d. Color Temp 2. Image Setting a. Clock b. Phase c. Sharpness d. H.Position e. V.Position Up / Left (-): [1] Scroll up the menu bar [2] Decrease setting Down / Right (+): [1] Scroll down the menu bar [2] Increase setting Power: Turn on or off the LCD 3. OSD Menu a. OSD H.Pos. b. OSD V.Pos. c. OSD Timer d.
(5) Use the “Up” or “Down” button to adjust the contrast of the display. (6) Press the “Menu” button to save and finish this setting. 2.3 Brightness (1) Press the “Menu” button. (2) Use the “Up” or “Down” button to scroll to the item “Color”. (3) Press the “Menu” button to enter. (4) Use the “Up” or “Down” button to scroll to the item “Brightness”. Contrast Brightness Color Adjust Color Temp (5) Press the “Menu” button to enter. (6) Use the “Up” or “Down” button to adjust the brightness of the display.
(3) Press the “Menu” button to enter (4) Use the “Up“ or “Down” button to scroll to the item “Color Temp” Contrast Brightness Color Adjust Color Temp (5) Press the “Menu” button to enter. (6) Use the “Down” and “Up” button to adjust the Color Temp of the display. (7) Press the “Menu” button to save and finish the setting. 2.
3. Touch Pad FUNCTION Basic Function Cursor Move This function is enabled when the finger moving on touchpad device. Scroll Function Multiple Finger Vertical Scroll vertical scrolling is 1 Finger (Left Button) It’s same as the left button of enabled when tap right side of touchpad then move finger. mouse. And it could be setup as the function as selected. for example: Click/Select, Content Menu, Run ...etc.
4. KVM Module 4.1 Introduction The 4-in-1 LCD drawer includes KVM module which provides efficient way to control many computers. Powerful model-detection design will enable all connected PCs to identify KVM model correctly to meet server versatility and reach optimum setup. Stackable function (by daisy-chain) enables to link other KVM switches at any time to expand connected computers. With the on-screen display (OSD), you can view all computer situation and able to name and set password for each computer.
4.
4.3 KVM’s Switch Operation (1) Switch Ports by Hotkey Commands You can conveniently command KVM Switch via a simple hotkey sequence. To send commands to KVM Switch, you must press the hotkey (default is Caps Lock) twice within 2 seconds. You will hear a beep sound confirming you are in the hotkey mode. If you do not press any key during hotkey mode over 2 seconds the hotkey mode will be terminated and back to normal state.
Example 1: To bring up the OSD by hotkey, press “Caps Lock”, “Caps Lock” and the “Space Bar”. Immediately, the OSD overlay screen will appear. The superimposed menu screen is generated by the KVM Switch, and does not affect your computers or software function in any way. within 2 seconds Caps Lock + Caps Lock Space Bar + = On Screen Display Menu Example 2: To switch to Bank 1 Port1, press “Caps Lock”, “Caps Lock”, and “1”, “0”, “1”.
(2) Switch Ports by KVM-OSD Press the button “M” = To activate KVM-OSD menu Use the up / down arrow to select the desired port. Figure KVM-OSD Menu of KVM Switch 4.4 Remarks (1) Please plug KVM switch adapter and use high quality 3-in-1 KVM cable for optimum operation. (2) To prevent potential power damage, please don’t use 2-wire extension cord and ensure AC outlets at PCs and monitors are on the same phase and have correct grounding. (3) Limited Warranty: A.
5. Installation 5.1 Cabinet Installation Below is the steps to install the LCD drawer with the standard 19-inch cabinet.
Step 3: Figure 3: Let the LCD drawer slide-in the rack mount bracket Step 4: Figure 4: Screw–in the LCD drawer at the left/right position - 15 -
5.2 Connection Diagrams For 3-in-1 LCD Drawer Plug the DC12V to the drawer. Plug HDB-15 end of the KVM cable to the drawer and plug the other end of the cable (with the sequence mouse, keyboard, then video) to PC’s ports. FIG.1 Single Console Connection between drawer and PC KVM-8901 3 M cable (PS/2 mouse, PS/2 keyboard, DB15 VGA) x 1, USB x 1 PC Connecting to PC with PS2 I/F Connecting to PC with USB I/F *The cable has ‘converter’ function, which converts the PS2 to USB.
For 3-in-1 LCD Drawer to external KVM Box Plug the DC12V to the drawer. Plug HDB-15 end of the KVM cable to the drawer and plug the other end of the cable (with the USB and video) to the external KVM box’s console. FIG.
For 4-in-1 LCD Drawer Plug the DC-power adapter to the drawer. Plug HDB-15 end of the KVM cable to a selected switch channel and plug the other end of the cable (with mouse/keyboard/video) to PC’s ports. FIG.3 Connection between 4-in-1 drawer and PC KVM-8901 Cascade additional KVM-Switch: plug HDB-15 end of the cable to the “cascade port” and the other end to the second KVM’s user console. FIG.
6.
7. Certifications FCC This equipment has been tested and found to comply with Part 15 of the FCC Rules. is subject to the following two conditions: (1) This device may not cause harmful interference (2) This device must accept any interference received.
APPENDIX-1 Notes on 3-in-1 LCD Drawer 1. Ensure that all cables are well seated. Label all of cables with the number for each respective computer to avoid confusion. 2. The recommended VGA cable distance is 5 meters maximum without ghosting and degradation. Normally, the cable length is based on driver capacity of your VGA card. If you need longer VGA cable, please use VGA extender (Model No. VGA-100, MAX. 100) to accomplish your applications. 3. The recommended PS2 cable distance is 5 meters maximum.
