IAT-1000 IP Audiocast Terminal IAT-1900/1920 IP Audiocast Manager User Manual V1.
Contents 1. Introduction..........................................................................................................3 1.1. 1.2. 1.3. 1.4. 2. Product Feature........................................................................................3 Software System Requirement................................................................3 Reference Application..............................................................................4 Package List...........................................
1. Introduction Easy deployment background music system The IP Audiocast Terminal from LevelOne (IAT-1000) is an ideal component to a flexible and powerful audio network covering a wide area. Old technology that uses regular twisted pair wiring is cumbersome and difficult to deploy. By using Cat.
1.3.
Advance application for shopping mall 1.4.
2. Panel introduce 2.1. Front Panel LED indicator Power On - Normal operation. Off - No power Link On - Normal operation. Off - No link Active Blinking - Blinks during data transfer Off - No link Status On - Normal operation (no data transfer). Blinking - Blinks during data transfer Off - No link 2.2. Rear Panel DC-IN Connect the power adapter here(12V/1A).
3. Installation 3.1.1. Hardware Installation Select a suitable location for the IAT-1000. To maximize reliability and performance, follow these guidelines: • Use an elevated location. (i.e. - On the top of a cubicle, or mounted on the wall.) • Turn on the IAT-1000 in where have a power, RJ-45 and stereo system.
3. Enter the name and organization, and then click “Next” to continue. 4. Please click “Next” to continue.
5. Please click “Install” to continue. 6.
4. IP Audiocast Manager NOTE: If you had brought IAT-1920 or IAT-1900, pleas find the USB Key License and plug in the computer before running manager software, the software will auto detect the USB Key License, if the utility do not detect the USB Key, then it will be only Manager Lite – 7 License(current active terminal), if utility had detect the USB Key(there have 2 level of license: 20 or unlimited), then the utility will update the license with advance feature.
4.1. Interface description Music Control Information Function Live Announcement Right-click to show function: Right-click to show function: Add Delete Rename Rename Maintain Change Zone Right-click to show function: Set Network 4.2. Start to use Please make sure below item before start! 1. Connect the IAT-1000 to a stereo system or powered speaker. 2. Connect the IAT-1000 to the local network. 3. Power on the IAT-1000. Notice: 1.
4.2.1. Play Background Music Each IAT-1000 belongs to a Zone (the default Zone is default.). All the IAT-1000s in a Zone receives the same music or announcement broadcast from the IP Audiocast Manager. For IAT-1920, it’s 20 Zones, for IAT-1900, it’s unlimited zones. 1. Click on the menu bar to open an mp3, a wav file, or an m3u playlist 2. Click on the menu bar to play back the music. Click playback, to stop the playback, or to play back the next song. to pause the to play back the previous song, 4.
4.2.3. Make Announcements 1 Connect a microphone or a headset to the Windows PC running the 2 IP Audiocast Manager. Click on the menu bar and the Announce Dialog Box pops up. 3 Choose a recording device from the Audio Recording Devices and select the Zones to announce. 4 Click Announce on the Announce Dialog Box to start the announcement. 5 Click Stop on the Announce Dialog Box to stop the announcement. 4.2.4.
For different Zone, IP Audiocast Manager will display in different colors. 4.2.5. Configure an IAT-1000 ※ Please make sure the computer with Manager Utility have to be the same IP segment with IAT-1000, first. Otherwise may not save the configuration. Right-click on an IAT-1000 to change its Name, Firmware, or Change Zone for its configuration. Click Rename and the Server Name Dialog Box pops up. Enter a Name and click OK.
Click Firmware and the Firmware Dialog Box pops up. Click Restart Server to restart the IAT-1000, Click Factory Default to reset the IAT-1000’s settings to its factory defaults Click Open to upgrade the firmware to the IAT-1000. Click Change Zone and select a new Zone for the IAT-1000.
4.2.6. Set the IP Address of an IAT-1000 Right-click the IP Address and click Set Network. The Set Network Dialog Box pops up. An IAT-1000 can be set to the DHCP Mode or the Static IP Mode. An IAT-1000 defaults to the DHCP Mode. After power on, an IAT-1000 attempts to get an IP address from a DHCP server on the network. If the IAT-1000 cannot get an IP address, the IAT-1000 assumes the IP address of 192.168.0.100. If the Static IP Mode is selected, enter the IP Address and the Subnet Mask.
4.2.7. Activate and Deactivate an IAT-1000 At the same time, up to 20 IAT-1000s can be activated to receive broadcasts from the IP Audiocast Manager. Click the Active column on the IP Audiocast Manager to activate or deactivate an IAT-1000. 4.2.8. Main feature – System 4.2.8.1. Edit Playlist Click System on the menu bar and click Edit Playlist. The Edit Playlist Dialog Box pops up.
4.2.8.2. Edit Schedule For IAT-1900/1920 only Click System on the menu bar and click Edit Schedule. Then the Edit Schedule Dialog Box pops up. Enter the parameters of each scheduled music playback and click Add Schedule. Click Confirm to save the Schedules. 4.2.9. Main feature – Play Click Play on the menu bar and click Repeat, then the play music will repeat If you want to stop the base music, it can click Stop Base Music.
4.2.10. Main feature – FTP For IAT-1900/1920 only Click FTP on the menu bar and click Open FTP. Then the FTP Dialog Box pops up. Enter the Host, Port, User Name, Password, Remote Dir for downloading files and click Open to open a Local Dir for saving downloaded files. Choose the Download Time or At Once, click Apply, FTP will download files from Remote Dir to Local Dir at the designated time. If user wants to stop download, click Stop.
Here is the Level1’s internet solution for reference Here is the internet FTP download application for reference
4.2.11. Help Click About on the menu bar and click Help. Then the IAT-1000 Info Dialog Box pops up. 5. FAQ Q: Why the speaker connected to IAT-1000 doesn’t work? A: please notice the IAT-1000 only support to connect powered speaker or via an amplifier to connect non-powered speaker. Q: Why the speaker no any voice out but the IAT-1000 had working? A: please make sure the IAT-1000 and IAT-1900/1920 are the same IP segment first. Q: Why the Utility cannot find the IAT-1000? A: please make sure few items 1.
