User guide

User's Manual - 19
Multiple devices information
Firmware Information
The selected rmware information will show the information about the le that you selected.
Firmware version: The version number of the selected rmware.
Select Firmware
You can use the “Select rmware” button to browse the le that you want upgrade onto the se-
lected device(s). After selected the le, Installation Wizard will check whether the le you select-
ed is correct. If it’s the correct version, then the package information will display the information
about the le and enable the “Start Upgrade” button. Therefore you can click on the button to
upgrade the rmware. If not, then it will be a pop-up warning message.
Select rmware