Specifications

OneSecure Video Management Software Amdinstrator Manual V3.0.09
110
Step 2: Remove OneSecure Server Program Folder (Optional)
If you are performing a complete un-installation without leaving any NVR server related data
on the current computer, you may consider deleting this folder.
After un-installation, the OneSecure system folder will remain under the Program Files folder
on your hard drive, the system configuration data here will not be removed until you delete
them manually. By default, the path of OneSecure system folder is C:\Program Files.
However, keeping this folder is convenient for a un-installation followed by an instant
re-installation, for the previous system settings can directly be applied to the new server.
Step 3: Remove the Recordings Folder (Optional)
Remove the whole Recordings folder(s) that saves the recorded video files on storage hard
drive(s). If you selected multiple storage hard drives via Setup page  Storage tab  “Disk
Drive List”, then the server may have generated one Recordings folder under each selected
drive. If you have renamed the folders or change the locations, please make sure you find the
correct path.
The Recordings folder contains
all the video raw files saved in
individual channel subfolders.
OneSecure Program Folder