LevelOne DVI Broadcaster Series ADE-8001 ADE-8002 ADE-8011 ADE-8201 ADE-8202 ADE-8204 ADE-8208 User Manual V 2.
Introduction Thank you for purchasing LevelOne DVI broadcaster series products. This DVI broadcaster extends your DVI-D and audio signal over Cat5/5e/6 and 4-wire phone cable. If you are using short range receiver (ADE-8001) to receive the DVI-D signal, the extended distance is up to 15m with 1024x768 resolution; and if using long range receiver (ADE-8002), the extended DVI-D distance can reach the distance up to 70m with 1024x768 resolution.
Key Features 1. Multiply one DVI-D and audio source to 2/4/8 DVI-D and audio outputs over Cat5/5e/6 and 4-wire phone cable. 2. Video Amplifier Bandwidth: 1.65GHz 3. Effective DVI-D extended distance and resolution for multi-port DVI Broadcaster: DVI Input: transmitting over standard DVI cable up to 10 meters DVI Output: transmitting over standard DVI cable, DVI resolution 1920x1200@10m.
Panel Description 1. ADE-8201 1-Port DVI Transmitter 1 2 3 4 1. 2. 3. 4. Connect to PC’s DVI Port Power indicator (Orange LED) Active (Green LED) RJ-45 DVI-D output 2.
Active : DDC2B activity Local Monitor: link of local monitor Power : Power Indicator Power Jack : Connect to power adapter VIDEO/AUDIO IN: Connect to DVI and audio source VIDEO/AUDIO OUT: Connect to local monitor and speaker RJ-45 VIDEO OUT: RJ-45 DVI output RJ-11 AUDIO OUT: RJ-11 Audio output 4.
5. ADE-8001 Short Range Receiver 1 2 1. DVI output (To monitor) 2. RJ-45 DVI input 6.
LINK IN : RJ-45 DVI input 7. ADE-8011 Cat.5 Audio Transmitter/Receiver 1 2 1. Connect to audio jack 2.
Installation and Operation 1. Install Single-Port Transmitter ADE-8201 and DVI Signal Receiver ADE-8001/8002: (1) Basic Function Test: In the beginning, please connect your DVI monitor to your PC or DVI player to confirm the basic display function and remain these devices turned on for next installation sequence.
(4) Install ADE-8002: A. Plug power adaptor to ADE-8002, the orange LED above RJ-45 should be ON to indicate the power on status. The other LED should turn off, since B. C. there is no input of video signal from “LINK IN” port. The “Auto” led in the front panel will turn ON as the EQ/FOCUS control switch to the left end and the EQ/FOCUS will stay on AUTO, this will not function until the receiver received video signal from “LINK IN” port. Connect DVI monitor’s DVI cable to the receiver.
(6) Connect Cat5/5e/6 cable: Plug two ends of cable to Transmitter and Receiver’s RJ-45 port, the monitor connected to the Receiver should display now and the green LED above ADE-8002’s RJ-45 port should be ON to reflect the DVI signal activation. For ADE-8002, you can manually adjust the EQ/FOCUS to have the best display quality.
2. Install Multi-Port Transmitter: (1) The 2/4/8-port model will all act the same except they have different amount of outputs. (2) First Time Set-up: Please turn off the DVI output device (PC or DVD Player) and monitors. (3) Connect local DVI monitor and speaker to the “DVI/AUDIO OUT” of the transmitter and plug one end of DVI/Audio cable to “DVI/Audio IN” port of transmitter and the other end of the cable to the output device’s DVI and speaker ports. (4) Connect power adaptor.
section 1.(4) ~ (6) to install ADE-8002 and cable. If the video connection is HDMI type, you will need to use appropriate DVI-HDMI adaptor to connect. The supported DVI-D resolution and distance is similar to regular DVI cable, the estimated ranges are: 800x600@80m, 1024x768@70m, 1280x1024@60m, 1920x1200@35m. Previous range can be applied in most of the application, but in some cases it might change. It will be appropriate to test the capacity of display before installation.
to 25 meters and the total extended length and resolution is about 800x600@20m, 1024x768@15m, 1280x1024@10m. Previous range can be applied in most of the application, but in some cases it might change. It will be appropriate to test the capacity of display before installation. Diagram of Connecting another Layer of Cat5/5e/6 DVI Transmitter 2. To ensure the transmitting quality of DVI-D signal, more than two layer of stacking is not recommended. 3. The transmitter can be 2, 4, or 8 port model.
Specification Model Function Input ADE-8201 ADE-8202 ADE-8204 ADE-8208 1-Port DVI Transmitter 2-Port DVI Broadcaster w/Audio 4-Port DVI Broadcaster w/Audio 8-Port DVI Broadcaster w/Audio DVI Male x 1 Output RJ-45 x 1 RJ-45 to DVI-D Receiver and RJ-11 to Audio Receiver One RJ-45 to DVI-D Receiver (ADE-8001 or ADE-8002) DVI Input Max Distance and Resolution DVI Output DVI Female x 1, Audio x 1 DVI Female x 1 DVI Female x 1 DVI Female x 1 Audio x 1 Audio x 1 Audio x 1 RJ-45 x 2 RJ-45 x 4
Model Function Input Output Max Distance and Resolution Signal Type ADE-8001 ADE-8002 ADE-8011 Short range DVI Receiver Long-Range DVI Receiver Cat.5 Audio Transmitter/Receiver RJ-45 x 1 RJ-45 x 1 RJ-11 x 1 Audio Jack x 1 DVI Female x 1 DVI Female x 1 Audio Jack x 1 RJ-11 x 1 Transmitting over Cat5/5e/6 cable, Transmitting over Cat5/5e/6 cable, DVI resolution 800x600@20m, 1024x768@15m, 1280x1024@10m.