User Guide

10.0 Password Reset
To clear the Wi-Fi credentials from the Level Sense Pro, complete the
following password reset steps. Press and hold the user button until
all four LEDs turn solid red. If after 10 seconds they have not turned
red, release the button for a few seconds and try again. It can take
several attempts to get into password reset mode. Once all four LEDs
remain lit, usually this requires two button clicks. Wait ten seconds
and press the reset button. The password reset is complete.
A red cloud LED following hotspot mode setup typically means an
sensitive. Use password reset to return the device to hotspot
mode and repeat the hotspot setup steps.
11.0 Battery Warning
Level Sense Pro contains a Lithium Ion Polymer battery which can
personal injury and damage to property. Please handle the device
carefully, never drop or subject the device to harsh movements or
environments. If the product is damaged in shipping, please
quarantine the device and contact us immediately. If you suspect
you have a damaged battery, place it in a safe open space and
observe the battery for approximately 15 minutes. A battery may
By using the Level Sense Pro, the buyer assumes all risks associated
Lithium Ion Polymer batteries. If you do not agree with these
conditions, return the device immediately before use.
Replace the battery after 300-500 full or partial discharges or three
years, whichever occurs sooner. Only use batteries from Level Sense.
12.0 Service Disclaimer
Level Sense includes a minimum cloud monitoring service (“Portal”)
period of one year from the date of manufacture. Continued service
reserves the right to alter, amend or change information, services and
pricing at any time. Level Sense also reserves the right to modify or
16