User Guide

5.3 Configure Device Name
By default, the Level Sense Pro is named “New Sensor“ in Portal.
devices in your Portal.
5.4 Update Frequency
Wi-Fi data.
6.0 Alarm Inputs
By default, all sensor inputs are enabled. Disable sensor inputs to suit
your application. Sensors can be re-enabled at a later point.
6.1 Temperature and Humidity Alarm
minimum and maximum safe levels. Alarms will occur when levels
are outside of these bounds.
6.2 Power Loss Alarm
An alarm will occur after 60 seconds of power failure. If Wi-Fi connection
is lost due to widespread power failure or lost Wi-Fi, an alarm message
e after
the device misses multiple consecutive check-ins. Using default settings,
ine.
ays of
continued failed check-ins.
6.3 Float Switch Alarm
6.4 Leak Sensor Alarm
The leak sensor will alarm when the sensor is in a minimum
water pool of 1/8” ” for more than 60 seconds.
13
Theȵoat switch will alarm when water lifts the sensorȵoat bobber for
more than 60 seconds.