User Guide

4.2 Connect with Hotspot
To connect to Wi-Fi with hotspot mode you will need a Wi-Fi
enabled device like a smart phone or laptop. The cloud LED of the
Level Sense Pro should be pulsing white, which indicates the device
is broadcasting a Wi-Fi hotspot. Use your Wi-Fi device to search
for and join the network called “Level-Sense.” You can learn more
about joining a Wi-Fi network by referring to the user manual of
your device. Once connected to the network “Level-Sense,” open
a web browser and navigate to the address: 192.168.4.1
On the webpage at 192.168.4.1 you will provide Wi-Fi SSID (Network
e,
press the submit button. The next webpage instructs you to reset
the device by pressing the reset button on the Level Sense Pro.
After restarting, the Cloud LED will pulse yellow until it connects
to your Wi-Fi. Upon successful connection, all four LEDs will pulse.
Please note the colors from left to right as they are used later in
the claim process, section 5.2. You have successfully connected
to your home Wi-Fi, please move on to Product Registration.
NOTE: If all four LEDs do not illuminate, and the Cloud
LED turns red, the SSID or password is entered incorrectly.
Refer to Pa ssword Reset, section 10.0 , of the manual.
11