Manualshelf

User Guide

ManualsBrandsLevel Sense ManualsElectricalLevel Sense PRO- Wi-Fi Enabled Sump Pump, Internal Self Recharging Battery, Temperature, Humidity, and Leak Detector. Displays Levels online.
11121314151617181920
4.1 Connect with WPS
has a button labeled “WPS.” If your router does not, proceed to
connecting with hotspot mode. Temporarily move the Level Sense
Pro control unit into close proximity of the Wi-Fi router. The Level
Sense Pro will operate on battery backup to complete this step if
allowed to charge for 30 minutes prior. Once the two devices are
Within 15 seconds, double click the USER button on the Level
Sense Pro. The Cloud LED will turn from pulsing white to solid
yellow. The WPS process can take up to three minutes. Upon
successful connection, all four LEDs will illuminate and pulse.
Please note the colors from left to right as they are used later in
the claim process, section 5.2. You have successfully connected
to your home Wi-Fi, please move on to Product Registration.
TIP: If the Cloud LED turns red following a WPS attempt, press the reset
button to restart the device. If the Cloud LED returns to red af ter restar ting,
check your router settings to see if WPS is enabled. Alternatively, try
connecting with hotspot mode.
10