Datasheet

Diagnostics and troubleshooting
Leuze electronic RSL 410 80
P0413 Safety configuration is not compatible:
unknown inputs SE1 and SE2.
Swap out the safety sensor or change the
configuration. The type of safety sensor
must be the same as the type stored in the
connection unit or in the
Sensor Studio soft-
ware.
P0414 Safety configuration is not compatible:
unknown EDM inputs.
Swap out the safety sensor or change the
configuration. The type of safety sensor
must be the same as the type stored in the
connection unit or in the
Sensor Studio soft-
ware.
P0415 Safety configuration is not compatible:
unknown field pair monitoring mode.
Swap out the safety sensor or change the
configuration. The type of safety sensor
must be the same as the type stored in the
connection unit or in the
Sensor Studio soft-
ware.
P0416 Safety configuration is not compatible:
unknown field pair monitoring parameters.
Swap out the safety sensor or change the
configuration. The type of safety sensor
must be the same as the type stored in the
connection unit or in the
Sensor Studio soft-
ware.
P0417 Safety configuration is not compatible:
unknown field pair monitoring mode.
Swap out the safety sensor or change the
configuration. The type of safety sensor
must be the same as the type stored in the
connection unit or in the
Sensor Studio soft-
ware.
P0419 Safety configuration is not compatible:
unknown monitoring parameter for the
changeover order.
Swap out the safety sensor or change the
configuration. The type of safety sensor
must be the same as the type stored in the
connection unit or in the
Sensor Studio soft-
ware.
P0420 Safety configuration is not compatible:
unknown monitoring mode of the field pair
changeover.
Swap out the safety sensor or change the
configuration. The type of safety sensor
must be the same as the type stored in the
connection unit or in the
Sensor Studio soft-
ware.
P0421 Safety configuration is not compatible:
unknown parameter for field pair changeover
monitoring.
Swap out the safety sensor or change the
configuration. The type of safety sensor
must be the same as the type stored in the
connection unit or in the
Sensor Studio soft-
ware.
P0422 Safety configuration is not compatible:
unknown field pair selection mode.
Swap out the safety sensor or change the
configuration. The type of safety sensor
must be the same as the type stored in the
connection unit or in the
Sensor Studio soft-
ware.
P0423 Safety configuration is not compatible:
unknown field pair selection parameter.
Swap out the safety sensor or change the
configuration. The type of safety sensor
must be the same as the type stored in the
connection unit or in the
Sensor Studio soft-
ware.
Diagnos-
tic ID
Diagnostics message Measure