Datasheet

Starting up the device
Leuze electronic RSL 410 74
 Configure the safety sensor according to the range and performance class of the replacement scanner
unit (see chapter 9 "Configuring the safety sensor").
 Transfer the configuration to the safety sensor with the replacement scanner unit.
The alphanumerical display confirms successful transfer of the configuration.
The replacement scanner unit is not compatible with the connection unit if the safety sensor displays a
fault.
Checking replacement scanner unit
The check performed on the replacement device depends on whether you automatically adopted the
configuration from the connection unit or whether you transferred the changed configuration to the safety
sensor.
 If you adopted the configuration from the connection unit, check the safety sensor using the checklist
for the daily test.
 If you transferred a new configuration to the safety sensor, check the safety sensor according to the rou-
tine for initial start-up (see chapter 11.1.1 "Checklist for integrator – to be performed prior to the initial
start-up and following modifications").