Datasheet

Functions

Leuze electronic RSL 410 30

Overview of the function modes

Table 5.2: Function modes

5.2.1 One protective function

A fixed field pair for safety-related switching outputs OSSD-A.

5.2.2 One protective function - four field mode

The safety sensor monitors one protection field and three warning fields.

Monitoring is performed together for the field pairs of protective function A and protective function B. If, for

example, the control system is monitoring field pair A1.1 for protective function A, field pair B1.1 for protec-

tive function B is also monitored.

1 Protective function A: protective field

2 Protective function B: protective field

3 Protective function A: warning field

4 Protective function B: warning field

Figure 5.1: Four field mode

If the protective field of protective function A is violated, safety-related switching outputs OSSD-A switch.

If the protective field of protective function B is violated, the indication signal B-CLEAR is generated – the

safety-related switching outputs do not switch.

The signals are assigned to the switching outputs via the configuration and diagnostics software

(CONFIGURATION > Outputs; see chapter 9 "Configuring the safety sensor").

Table 5.3: Example: Assignment of signals to switching outputs

Function mode Field pairs (FP)

Protective field (PF)

Warning field (WF)

Field pair activation

One protective function 1 FP / 1 PF + 1 WF Fixed selection of a field pair

One protective function - four field

mode

1 FP / 1 PF + 3 WF Fixed selection of a field pair

A1.1P

B1.1P

A1.1W

B1.1W