Datasheet
Configuration and diagnostic software Sensor Studio
Leuze electronic RSL 410 25
Setting device manager
Using the menus of the device manager (DTM) you can set the parameters of the safety configuration. The
online help system provides information on the menu items and adjustment parameters. Select the Help
menu item in the menu [?].
4.5.1 Selecting access level
Using the device manager you can change the access level of the user if necessary.
For the authorization concept of the software, see chapter 5.1 "Authorization concept of safety sensor".
Click in the DTM menu bar on the [Change access level] button ( ).
The Change access level dialog box opens.
In the
Access level
list, select the item
Expert
,
Engineer
or
Observer
and enter the default password or
the password defined for the individual user.
The following access levels are available:
•
Observer
can read everything (no password)
•
Expert
can change communication and diagnostics settings (default password = comdiag)
•
Engineer
can additionally change the safety configuration (default password = safety)
The password is case-sensitive (i.e. a distinction is made between upper-case and lower-case letters).
Confirm with [OK].
4.5.2 IDENTIFICATION
Detailed information on the menu items and setting parameters can be found in the information area and
in the online help. Select the Help menu item in the menu [?].
• Safety laser scanner RSL 400
• Sensor and configuration data
• Technical data
4.5.3 PROCESS
Detailed information on the menu items and setting parameters can be found in the information area and
in the online help. Select the Help menu item in the menu [?].
• Sensor display
Device display in the DTM menu
• SENSOR DISPLAY
• STATE OF THE ACTIVE PROTECTIVE AND WARNING FIELDS
• SENSOR DATA
• Measurement contour
• Inputs / outputs
• SENSOR DISPLAY
• CONNECTIONS AND SIGNALS
• Simulation – only with access level
Engineer
• Measurement contour
• Inputs / outputs
4.5.4 CONFIGURATION
see chapter 9 "Configuring the safety sensor"
You can only transfer changes made in the CONFIGURATION menu to the safety sensor if you
are logged in with the access level
Engineer
.