Datasheet

Configuration and diagnostic software Sensor Studio
Leuze electronic RSL 410 18
4 Configuration and diagnostic software Sensor Studio
To start up a safety sensor in your application, the safety sensor must be set up according to its specific
use using the configuration and diagnostic software. The software is used to set up the safety configuration
of the safety sensor, to change the communication and diagnostics settings and to perform diagnostic
routines. Communication takes place via the PC.
The software is designed according to the FDT/DTM concept:
• You make the individual configurations for the safety sensor in the Device Type Manager (DTM).
• The individual DTM configurations of a project can be called up via the frame application of the Field
Device Tool (FDT).
• Each device DTM has a communication DTM that sets up and monitors the communication connec-
tions to the sensor.
4.1 System requirements
To use the software, you need a PC or laptop with the following specifications:
4.2 Installing software
Prerequisites:
• You do not need the safety sensor to install the software on the PC.
• All Windows applications are closed.
Installing the Sensor Studio software
Only use the software for safety sensors manufactured by Leuze electronic.
Hard disk space At least 250 MB free memory
If you want to save the protective field or configuration values, you
will need more memory.
Screen display Color
External drive DVD drive
Input device Keyboard and mouse or touchpad
Output device Printer (black-white or color)
Interfaces RJ45 Ethernet network
Bluetooth (optional) - If the PC does not have integrated Bluetooth
technology, use an appropriate USB or PCMCIA adapter if neces-
sary.
Operating system Microsoft
® Windows 7 and Windows 8.1
Only the term “PC” is used below.
The software is installed in two steps:
- Install the
Sensor Studio FDT frame.
- Install the
LeSafetyCollection device manager (DTM).
If FDT frame software is already installed on your PC, you do not need the Sensor Studio instal-
lation.
You can install the device manager (DTM) in the existing FDT frame.