Datasheet

Device description
Leuze electronic RSL 410 14
Only when the protective field is free again does the safety sensor reset the safety-related switching func-
tion, either automatically or following acknowledgment, depending on the operating mode.
The safety sensor can even detect people when they are wearing very dark clothes, which have a very
weak diffuse reflectance.
3.1.2 Parameters for protective function
The following parameters for switching off the safety-related switching outputs of the safety sensor are
taken into consideration for the protective function:
• Configurable protective fields
• Reference contour of protective fields
• Configurable field pair changeover
• Selectable resolution for hand, leg or body detection
• Safety sensor response time
• Selectable start-up behavior
The following non-safety-oriented functions and signals also belong to the protective function:
• Configurable warning fields
• Configurable indication signals
Additional functions of the protective function
• Warning field evaluation
• Selectable dynamic contactor monitoring (EDM)
3.2 Connection unit
The safety sensor is mounted, connected and aligned using the connection unit.
1 M12 socket, A-coded, connection to the control
2 M12 socket, D-coded, Ethernet communication connection
M5 Connection for functional earth with M5 x 10 self-cutting/self-tapping (gas tightness) and ground
strap
Figure 3.2: Device overview, connection unit
Functions of connection unit:
• Attachment point for mounting, either directly or using an optional mounting system
When devices are swapped out, the connection unit remains mounted and aligned.
• EMC wiring for signal inputs/outputs and supply using M12 plug
M5 2x
2
1
Safety sensor Connection unit Connection
RSL 410 CU408-M12 M12 plug, 8-pin