Datasheet

ManualsBrandsLeuze electronic ManualsOptical SensorsPolarized Retro-Reflective Photoelectric Sensor 3m 2 x PNP

Leuze electronic GmbH + Co. KG In der Braike 1 D-73277 Owen Tel. +49 (0) 7021 573-0

info@leuze.com • www.leuze.com

We reserve the right to make changes •

 Polarized laser retro-reflective photoelec-

tric sensor with autocollimation optics and

visible red light

 Short response time, low jitter and high

switching frequency for detection of fast

events

 Small and compact construction with

robust plastic housing, degrees of protec-

tion IP 67 and IP 69K, tested in accordance

with Ecolab for industrial application

 NEW: Variant with a second switching

output in place of the teach input

 NEW: Housing variant with two integrated

M3 metal threaded sleeves

 NEW: Housing variant with integrated slot-

ted-hole mounting sleeve made of metal

0…3m

3 kHz

10 - 30 V

Accessories:

(available separately)

 Mounting systems (BT …)

 Cables with M8 or M12

connector (KD …)

 Reflectors

 Reflective tapes

 IO-Link master set

SET MD12-US2-IL1.1 + accessories -

diagnostics set (part no. 50121098)

IEC 60947...

IPIP 69K69K

IPIP 6767

Dimensioned drawing

A Green indicator diode

B Yellow indicator diode

C Optical axis

D Teach button

E Mounting sleeve (standard)

F Threaded sleeve (PRK3CL….B…)

Electrical connection

Connector, 4-pin

Connector, 3-pin

Cable, 4 wires

PRK3CL autocollimation Laser retro-reflective photoel. sensor with polariz. filter

PRK3CL Laser - 02

Technical data and description

en 02-2017/02 50130054

Summary of content (10 pages)

PAGE 1
Technical data and description PRK3CL autocollimation Laser retro-reflective photoel. sensor with polariz.
PAGE 2
PRK3CL autocollimation Technical data Optical data Tables Laser class 1 Typ. operating range limit (MTKS 50x50) 0 … 3m Models of laser class 1: Reflectors Operating range 1) Operating range 2) Light beam diameter Squint angle Light source 3) Laser class Wavelength Max. output power Pulse duration see tables approx. 1 mm, consistent typ. ± 2° laser (pulsed) 1 acc. to IEC 60825-1:2007 655nm (visible red light, polarized) ≤ 1.7mW ≤ 5.3μs Sensor operating modes IO-Link SIO Configuration COM2 (38.
PAGE 3
PRK3CL autocollimation Laser retro-reflective photoel. sensor with polariz. filter Part number code P R K 3 C .
PAGE 4
PRK3CL autocollimation Order guide The sensors listed here are preferred types; current information at www.leuze.com Sensors with through-holes Order code Part no. Sensors with threaded sleeves Order code Part no. Accessories mounting systems Order code Part no. PRK3CL1.A3/4T-M8 PRK3CL1.A3/4-M8.3 PRK3CL1.A3/4T PRK3CL1.A3/4T-200-M12 PRK3CL1.A3/4T-200-M8 PRK3CL1.A3/4P-M8 PRK3CL1.A3/4P PRK3CL1.A3/4P-200-M12 PRK3CL1.A3/4P-200-M8 PRK3CL1.A3/LP-M8 PRK3CL1.A3/LP PRK3CL1.A3/LP-200-M12 PRK3CL1.
PAGE 5
PRK3CL autocollimation Laser retro-reflective photoel. sensor with polariz. filter Laser safety notices - laser class 1 ATTENTION, LASER RADIATION – LASER CLASS 1 The device satisfies the requirements of IEC 60825-1:2007 (EN 60825-1:2007) safety regulations for a product of laser class 1 as well as the U.S. 21 CFR 1040.10 regulations with deviations corresponding to "Laser Notice No. 50" from June 24, 2007.  Observe the applicable statutory and local laser protection regulations.
PAGE 6
PRK3CL autocollimation IO-Link interface Sensors in the PRK3C…/L… variant have a dual-channel architecture. The IO-Link interface in accordance with specification 1.1.1 (October 2011) is provided on pin 4 (OUT 1). This allows the devices to be configured quickly and easily and, therefore, cost-effectively. Furthermore, the sensor transmits its process data and makes diagnostic information available through it.
PAGE 7
PRK3CL autocollimation Laser retro-reflective photoel. sensor with polariz. filter Functions configurable via IO-Link PC configuration and visualization is performed comfortably with the USB-IO-Link Master SET US2-IL1.1 (part no. 50121098) and the Leuze Sensor Studio (in the download area of the sensor at www.leuze.com).
PAGE 8
PRK3CL autocollimation Sensor adjustment (teach) via teach button The sensor is factory-adjusted for maximum operating range. The teach procedure is only necessary if the sensor does not switch when an object enters the light beam.  Standard teach (low sensitivity)  Sensitive teach (increased sensitivity) Clear the light path before teaching! 1. Hold down the teach button (2 to 7s) until the yellow and green LEDs flash simultaneously. 1.
PAGE 9
PRK3CL autocollimation Laser retro-reflective photoel. sensor with polariz. filter Sensor adjustment (teach) via teach input (pin 2) The following description applies to PNP switching logic! Signal level LOW ≤ 2V Signal level HIGH ≥ (UB-2V) With the NPN models, the signal levels are inverted! Standard teach (low sensitivity) Standard teach (low sensitivity) is performed HIGH t = 20 ...
PAGE 10
PRK3CL autocollimation PRK3CL Laser - 02 2017/02