Datasheet

PRK 55/6(D).42… - 05 2012/11
Teach for 18% sensor sensitivity (standard bottles)
 Press teach button until both LEDs flash
alternatingly
.
 Release teach button.
 Ready.
After the teaching, the sensor switches
when about 18% of the light beam are
covered by the object.
Teaching for maximum operating range (factory setting at delivery)
 Prior to teaching:
Cover
the light path to the reflector!
 Press teach button until both LEDs flash
simultaneously
.
 Release teach button.
 Ready.
Adjusting the switching behavior of the switching output – light/dark switching
 Press teach button until the green LED flashes.
The yellow LED displays the current setting of
the switching output:
ON = output switches on light
OFF = output switches on dark
 Continue to press the teach button in order to
change the switching behavior.
 Release teach button.
 Ready.
7…12s
alternatingly
flashing at
3Hz
LED
green
LED
yellow
2…7s
simultaneously
flashing at
3Hz
LED
green
LED
yellow
>12s
LED
green
flashes at
3Hz
LED yellow
ON =
light switching
OFF =
dark switching
PRK 55