Datasheet

Leuze electronic GmbH + Co. KG In der Braike 1 D-73277 Owen Tel. [phone] ODSL 9/…-100-… - 03
[e-mail] • www.leuze.com
Analog output: characteristic curve for factory setting
Serial output: transmission protocol for factory setting
9600Bd, 1 start bit, 8 data bits, 1 stop bit,
transmission protocol ASCII measurement values
Transmission format: MMMMM<CR>
MMMMM = 5-digit measurement value in mm (resolution 0.01mm)
<CR> = ASCII character "Carriage Return" (x0D)
Operation of ODSL 9/D26… with MA2xxi modular interfacing unit
Set S4 rotary switch for device selection in MA 2xxi to switch position "B" (AMS)
(see MA 2xxi Technical description).
Set the serial interface of the ODSL 9/D26… to:
 ASCII (factory setting)
 Baud rate: 38400Bd (see ODSL 9 Technical description…)
A Area not defined
B Linearity not defined
C Measurement range
D Object present
E No object detected
F Measurement distance
Starting at approx. 650mm, measurement
value "0" is displayed and 0V is output at the
analog output.
ODSL 9 Optical laser distance sensors