Datasheet

Leuze electronic GmbH + Co. KG In der Braike 1 D-73277 Owen Tel. [phone] ODS10L1.8/L… - 04
[e-mail] • www.leuze.com
Laser safety notices
Analog output: characteristic curve for factory setting
Individual measure modes
ATTENTION, LASER RADIATION – LASER CLASS 1
The device satisfies the requirements of IEC 60825-1:2007 (EN 60825-1:2007) safety regulations for a product of laser class 1 as well
as the U.S. 21 CFR 1040.10 regulations with deviations corresponding to "Laser Notice No. 50" from June 24, 2007.
 Observe the applicable statutory and local laser protection regulations.
 The device must not be tampered with and must not be changed in any way.
There are no user-serviceable parts inside the device.
Repairs must only be performed by Leuze electronic GmbH + Co. KG.
Factory setting
A Area not defined
B Linearity not defined
C Measurement range
D Object present
E No object detected
F Measurement distance
Measure mode
Adjustable number of measurements
for the floating average calculation
Adjustable filter depth Measurement value formation
Individual 1 … 300 – –
Spike suppression 5 … 300
Raw
Approx. 75% of the
measurement values are
averaged in the center
Medium
Approx. 50% of the
measurement values are
averaged in the center
Fine
Approx. 25% of the
measurement values are
averaged in the center
300
ca. 2.5
4
20
ca. 24
I [mA]
0
1
10
ca. 11
U [V]
50 8000 8500 ca. 10000
75%
50%
25%
ODS10 Optical distance sensors