Datasheet

Specifications for Leuze end devices
Leuze electronic MA 248i 95
TNT 35/7-24V
16.8 Hand-held scanner (S4 switch position 8)
Specifications for the serial interface
Notice!
Command mode cannot be used with hand-held scanners.
Recommended settings
• Input module: dependent on the number of digits of the bar code or 2D code that is
to be read.
With a 12-digit code (+ 2 bytes of status bytes), for example, the input module with
16 bytes is advisable.
• Output module: none
Default parameter Hand-held scanner
Baud rate 9600
Data mode 8N1
Handshake no
Protocol framing protocol without acknowledgment
Frame <Data> <CR> <LF>