Datasheet

Specifications for Leuze end devices
88 MA 248i Leuze electronic
KONTURflex specifications
Settings on the MA 248i
• PROFINET address is freely selectable
• Device selection switch at position "0"
PROFINET settings
• Module selection:
Dependent on number of beams used, but at least "8 bytes In"
• User parameters:
"Transparent mode", "Use GSD settings", baud rate 38400, "8 data bits",
"No parity", "2 stop bits"
KONTURflex settings
First, the following settings are to be performed on the device using KONTURFlex-Soft:
• Either "Autosend (fast)" or "Autosend with data in Modbus format"
• Repeat time "31.5ms"
• Autosend baud rate "38.4KB"
• 2 stop bits, no parity