Datasheet

Modes
Leuze electronic MA 248i 59
TNT 35/7-24V
Examples for the activation of a Leuze device
In the data part (starting at byte 2) of the telegram to the gateway, a "+" (ASCII) is sent for
activation.
This means that the hex value "2B" (corresponds to a "+") is to be entered in control or output
byte 2. To deactivate the reading gate, a "2D" (hex) must be used instead (corresponds to
a "-" ASCII).
76543210
ND Address 4 Address 3 Address 2 Address 1 Address 0 Broadcast
Command
mode
Control byte 0
CTB SFB R-ACK Control byte 1
Data byte / parameter byte 0
DataData byte / parameter byte 1
…
76543210
00000000 Output byte 0
00000000 Output byte 1
000000
B 2 Output byte 2
00000000 Output byte 3